Silvercrest WK 8 A2 Quick Start Manual page 37

Format memory card
Formatting the microSDHC memory card
all data on it. Before you use a new memory card in the camera or
a card that has previously been used in another device, you should
first format the memory card.
In this case, select the setting "YES" with the OK button. The
♦
formatting process starts. While the card is being formatted,
the message "Please wait" appears.
CAUTION
► Ensure that the memory card does not contain any files that
you need!
Camera name
Select "On" if you would like to add a name to saved photo stamps.
In the following screen menu, you can set a ten-character name:
♦ Press the /
space.
♦ Then switch to the next field using the
♦ Repeat the steps described above to set all ten characters. The
preset characters "WK 8 A2" must be replaced with a blank
space if you do not want them to appear in the name.
Confirm your selection with the OK button. Afterwards, press the
♦
MENU button to close this submenu.
WK 8 A2
Camera name
W K 8 A 2
buttons to select a number, a letter or a blank
34
will permanently delete
button.
GB │ IE │ NI │
27 ■