Advertisement
Quick Links
V‑4022C INDOOR HD VIDEO
CAMERA
Installation Guide
Figure 1: V-4022C Camera
DESCRIPTION
The V‑4022C is a 2 Megapixel
indoor video camera that allows
users to view live and recorded HD
video clips in Virtual Keypad™.
To activate the camera, you need an
active Dealer Admin account at
dealer.securecomwireless.com.
Compatibility
•
Any active Virtual Keypad
account with SecureCom
Cameras & NVRs enabled
What is Included?
•
One V‑4022C Camera with
Mounting Plate
•
12 VDC Power Supply
•
Mounting Template
•
Hardware Pack
1
WIRE THE CAMERA
Refer to Figure 2 for the location of power and Ethernet
connectors.
Standard Power Connection
Connect the 12 VDC power supply to the camera power connector.
For wired network, connect a network cable to the camera
Ethernet connector.
PoE Connection
Connect a network cable to the camera Ethernet connector.
Connect the cable to a PoE switch or injector.
Pan
Adjustment
Knob
Tilt/Rotation
Adjustment
Knob
Lens
LED
Access Panel
WPS/Reset
Ethernet
12 VDC
Power
Base
Figure 2: Camera Details
Mounting
Plate
Release
Advertisement
Related Manuals for SECURECOM V‑4022C
Summary of Contents for SECURECOM V‑4022C
- Page 1 Lens To activate the camera, you need an active Dealer Admin account at dealer.securecomwireless.com. Compatibility Mounting • Any active Virtual Keypad Plate account with SecureCom Release Cameras & NVRs enabled Access Panel What is Included? WPS/Reset Adjustment Knob • One V‑4022C Camera with...
- Page 2 MOUNT THE CAMERA The V‑4022C is suitable for stand, wall, and ceiling mounting applications. Refer to Figure 2 and Figure 3 during mounting and camera adjustment. Wall or Ceiling Mount Ceiling mounting will be covered as an example in this section. However, the same steps may be referenced for wall mounting.
- Page 3 CONNECT THE CAMERA Select one of the following connection methods and complete the appropriate steps to configure the camera. Note: SecureCom recommends marking the Ethernet cable from the customer’s router to the WAP to help with network troubleshooting. Connect to a SecureCom WAP Auto Pair Verify that the WAP is powered.
- Page 4 Ordering Information V-4022C 2 MP Indoor HD Video Camera VIDEO CAMERA Accessories 371-500B-W 12 VDC Power Supply V-IP1006RR SecureCom Wireless Access Point Specifications (WAP) Sensor and Lens Compatibility Image Sensor 2 MP, 1/3” CMOS Any DMP system with an active Virtual Keypad™ account Network 802.3 compliant 10/100 LAN...