Warnings; Maintenance; Fun Drinking Tip; Parts Id - Lunatec Hydration spray bottle Manual

MAINTENANCE

• Clean with soap and water as needed. The base is
dishwasher safe for top ack only. The lid is NOT
dishwasher safe.
• Do not put the unit in the freezer.
• Store out of direct sunlight.
• Do not store pressurized for more than 36 hours.
• Spray air through the unit to dry out the silicone tube
before storing for long periods.
• It's a good idea to lock the trigger in the ON position
when storing for long periods to keep the Pinch Tube
from kinking.
• Spare parts are available on unatecgear.com.
• Instructional videos are available on product pages at
lunatecgear.com.
• For help, contact us at support@lunatecgear.com

TROUBLESHOOTING CHART

PROBLEM
Unit does not build or hold pressure
Builds pressure but does not spray
Water is getting inside of pump barrel
Water is leaking from under trigger
Leaks around Nozzle Cap
Mist is not fine
Spray is too noisy
• Do not over-pressurize the unit.
• Do not use liquids with temperatures above 120ºF / 49ºC.
• CHOKING HAZARD Unit contains small parts. Not suitable for children under 3 years.
• Only use hydration spray lids with Lunatec bottle bases.
• Do not use lid on any metal or glass bases.
FAILURE TO READ AND FOLLOW THE ABOVE WARNINGS AND OPERATING INSTRUCTIONS COULD
LEAD TO SERIOUS BODILY INJURY.

FUN DRINKING TIP

1. Remove the nozzle cap to allow more
water flow.
2. Put your mouth on the nozzle like you
would a drinking straw.
3. Spray the water into your mouth
instead of sucking!
REASON
Lid O-ring is missing Replacement parts available at lunatecgear.com
Pump Barrel is too loose Tighten Pump Barrel
Something else Email support@lunatecgear.com or call 858.653.0401
Pinch Tube is kinked Remove trigger and unkink Pinch Tube
Something Else Email support@lunatecgear.com or call 858.653.0401
Umbrella Valve is not sealing Replacement parts available at lunatecgear.com
Pump Barrel is too loose Tighten Pump Barrel
Pinch Tube is damaged Replacement parts available at lunatecgear.com
Something else Email support@lunatecgear.com or call 858.653.0401
Soft Nozzle is missing Replacement parts available at lunatecgear.com
Wear and tear on Soft Nozzle Replacement parts available at lunatecgear.com
Something else Email support@lunatecgear.com or call 858.653.0401
Try sanding 0.5 mm of open side of the Nozzle Cap
Wear and tear
If that doesn't work, order a new Nozzle Cap.
Operating mode is in Pulse Switch to Stealth mode
Something else Email support@lunatecgear.com or call 858.653.0401
Operating mode is in Pulse Switch to Stealth mode

WARNINGS

SOLUTION
7
8
9

PARTS ID

Pump Handle
1
Trigger
2
Spring
3
14
Pinch Tube
4
Lid
5
Lid Nozzle
6
Nozzle Adapter
7
Soft Nozzle
8
Nozzle Cap
9
Lid O-ring
10
Draw Tube Adapter
11
Draw Tube O-ring
12
Piston Rod
13
Pump Barrel O-ring
14
Pump Barrel
15
Tube
Draw
16
Umbrella Valve
17
Piston O-ring
18
Weighted Screen
19
1
2
3
4
6
5
10
11
13
12
15
16
17
18
19