Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Saramonic SR-Q2
Summary of Contents for Saramonic SR-Q2
- Page 1 Handheld Stereo Audio Recorder SR-Q2 User Manual...
- Page 2 Please save it for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic.com. Cautions 1. Do not use the unit under water, don't expose it to rain. Please store it in a cool, dry place.
-
Page 3: General Introduction
Separate microphone input and line input jacks provide a multitude of options for attaching a wide range of audio equipment. SR-Q2 runs on two AA batteries or it could powered with DC 5V power via its USB port. With audio input level control and real-time headphone monitoring, the SR-Q2 allows you to easily record audio safety at optimum signal. - Page 4 REC button Press the REC button to start recording immediately. Control panel Go through menu and select functions or values shown on the display. Refer to "5. Control Buttons Introduction" MICROPHONE IN jack A stereo 3.5mm microphone jack. Plug in 3.5mm stereo TRS microphone. Built-in speaker Easily check the playback audio with no delay.
- Page 5 4. Quick Setup Guide HOLD Slide the power button to HOLD to disable all the buttons, preventing inadvertent 4.1 Install two AA batteries and a memory card operation. • Pull off the cover of the card slot, insert a MicroSD or MicroSDXC memory card into the DC 5V USB port card slot with the contacts facing up.
- Page 6 4.4 Slide the power button to for 2 seconds until the Saramonic startup screen appears, and the SR-Q2 is powered on. System default is on recording screen once powered on. Note: If the unit isn't in use for long time, the real-time-clock battery can run out.
- Page 7 6. LCD Screen 00 : 00 : 00 REC-001. wav 1 001/006 Recording Screen Playback Screen Power indicator Microphone gain volume (from 1 to 60) Headphone monitor volume (from 1 to 30) Level meter Elapsed time. This shows the elapsed time (hours: minutes: seconds) of the current file.
-
Page 8: Operating Menu
7. Operating Menu Note: SR-Q2 will automatically create a maximum of 9 folders. Folder names Main Menu Sub Menu Sub Menu FOLDER01-FOLDER09. Each folder can 1 FILE FOLDER01 REC-001.WAV accommodate 200 wav files. File names REC- 001.WAV - REC-200.WAV. 30 minutes... - Page 9 Menu Introduction Recording Time (hour) (1) FILE: Press Play button to browse all recorded files. FOLDER01: Folder name. REC-001.wav: File name. Delete File: Select a file and press enter delete option. Press left or right button to choose “Yes” or “No”, then press to confirm.
-
Page 10: Specification
Input level 0 to -45dB level. Then press to confirm and exit. Output impedance 2 kΩ Version: Version of the SR-Q2. Line output 3.5mm (1/8) stereo jack Output load Factory Reset: Restore factory settings. 10 kΩ or more... -
Page 11: Packing List
9. Packing List The SR-Q2 Micro SD card (8G) USB cable Foam windscreen Furry windscreen Hanging strap Storage bag User manual Warranty card... - Page 12 The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info@saramonic.com...
Need help?
Do you have a question about the SR-Q2 and is the answer not in the manual?
Questions and answers