Table of Contents
Advertisement
The appliance door can be aligned with
the appliance housing after it has been
fitted.
In the following illustration the door is
not shown in the closed position to
make it easier to see what you have to
do.
To align the appliance door, use the
outer slots in the lower hinge plate:
Remove the centre screw from the
hinge plate.
Slightly loosen both outer screws .
Align the door by sliding the hinge
plate to the left or right.
Then tighten the screws . The
screw does not need to be refitted.
Aligning the appliance door
59
Hide quick links:
Advertisement
Table of Contents
