Advertisement
Quick Links
Advertisement
Related Manuals for ekwb EK-Quantum InWin 909EK Silver Limited
Summary of Contents for ekwb EK-Quantum InWin 909EK Silver Limited
- Page 1 EK-Quantum InWin 909EK Silver Limited USER GUIDE...
- Page 3 Thank you for purchasing our co-branded limited edition InWin 909EK chassis. We hope you enjoy your new case. Feel free to follow us on social media. EKWaterBlocks @EKWaterBlocks ekwaterblocks EKWBofficial ekwaterblocks Before you start using this product, please follow the basic guidelines: Carefully read the manual before you begin the installation process! EK fittings require only a small amount of force to screw them firmly into place since the liquid seal is ensured by the rubber...
-
Page 4: Table Of Contents
TABLE OF CONTENT TECHNICAL SPECIFICATIONS ACCESSORIES DISTRIBUTION PLATE CONFIGURATION PUMP INSTALLATION RADIATOR AND FAN INSTALLATION TESTING THE LOOP CABLE MANAGEMENT GUIDES SUPPORT AND SERVICE... -
Page 5: Technical Specifications
TECHNICAL SPECIFICATIONS - Model name: InWin 909EK - Dimensions (W x D x H): 255 x 575 x 540mm - Color: Silver - Tempered Glass Panel: No - Power Supply Compatibility: ATX Length up to 250mm - Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX (and E-ATX up to 277mm wide) - Drive Compatibility: two 3.5”... - Page 6 Cable Guide – 8 Cable Guide – 8+8 Cable Guide – 24 Blank Plate Cable Guide – USB Build Number Plate 2. InWin 909EK Chassis Accessories M3x5 Motherboard Stand-Off #6-32x8 2.5” HDD Screws PSU Screws M3x6 Motherboard Stand-Off #6-32x6 Fan Side Panel Spare Screws Socket Motherboard Screws 6x Black...
- Page 7 Congratulations on receiving one of only 200 EK-Quantum InWin 909EK Silver Limited cases in existence. This product was concieved and developed as the ultimate showcase for EK-Quantum parts. Your new case includes a pre-installed distribution plate with an integrated cable management solution. In addition, there are mounting holes provisioned for up to two D5 Standalone pumps, two XE 480 Radiators, and eleven Vardar 120mm Fans.
-
Page 8: Distribution Plate Configuration
DISTRIBUTION PLATE CONFIGURATION In order to complete your loop, all of the ports should be used as marked in the diagrams. One port of each type must be used. In the eventuality that a GPU or CPU block is not installed into the system, the respective inlet and outlet ports must still be connected to each other. -
Page 9: Pump Installation
PUMP INSTALLATION D5 Standalone pumps can be installed directly to the chassis using the supplied M4x8 Countersunk screws and pre-drilled mounting holes. - 9 -... -
Page 10: Radiator And Fan Installation
RADIATOR AND FAN INSTALLATION Radiators and Fans may be mounted onto the 3 brackets outside of the case and then installed together. EK recommends the use of ZMT 10/16mm tubing for the radiators and pumps to prevent kinks. - 10 -... -
Page 11: Testing The Loop
TESTING THE LOOP To make sure the installation of your EK components was successful, Inspect all parts of the loop, and in the eventuality that coolant leaks, we recommend you perform a leak test for 24 hours. fix the issue and repeat the testing process. Ensure that all hardware is dry before the system is powered on in order to prevent any damage. -
Page 12: Support And Service
SUPPORT AND SERVICE For assistance please contact: http://support.ekwb.com/ EKWB d.o.o. Pod lipami 18 1218 Komenda Slovenia - EU...
Need help?
Do you have a question about the EK-Quantum InWin 909EK Silver Limited and is the answer not in the manual?
Questions and answers