Model Exposure; Calibrating X-Ray Unit For Impression Or Plaster Material; Preparing Calibration Material - Planmeca ProMax 3D Plus Manual

10 3D model exposure
10 3D model exposure

10.1 Calibrating X-ray unit for impression or plaster material

10.1.1 Preparing calibration material

58 Planmeca ProMax
CAUTION
The 3D Model programs must not be used for patient imaging. The
programs are intended for taking exposures of impressions and plaster casts
only.
NOTE
The X-ray unit has to be calibrated for each new material that is used. The
X-ray unit needs to be calibrated only once for each material.
NOTE
FOR IMPRESSIONS:
Only monophase impression materials can be used.
NOTE
FOR PLASTER CASTS:
If the plaster cast consists of two materials, the X-ray unit has to be
calibrated for the teeth material.
1. Insert impression material (1) into the calibration cup (2) provided (part
number 10031325), until the calibration cup is full.
User's manual