Led Description - Fujitsu 8FX MB2146-510-01-E Setup Manual

2.5 LED Description

First, only plug USB cable to PC, checking the Power LED on BGMA turns Green. Refer to Figure 8.
Second, plug IDC10 cable to the EV-board (target MCU board), then turn on EV-board. After that
check Power LED on the BGMA turns Orange. Refer to Figure 9.
USB Plugged to PC
Figure 8 BGMA Power LED (1)
Orange
Figure 9 BGMA Power LED (2)
Green
5V Power Supplied
IDC Cable
7