FANATEC ClubSport Universal Hub For Xbox One Manual
  1. Manuals
  2. Brands
  3. FANATEC Manuals
  4. Video Gaming Accessories
  5. ClubSport Universal Hub For Xbox One
  6. Manual

FANATEC ClubSport Universal Hub For Xbox One Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Manual
www.fanatec.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ClubSport Universal Hub For Xbox One and is the answer not in the manual?

Questions and answers

Related Manuals for FANATEC ClubSport Universal Hub For Xbox One

Summary of Contents for FANATEC ClubSport Universal Hub For Xbox One

  • Page 1 Manual www.fanatec.com...
  • Page 2 Thank you for choosing To get the most out of and before using your new ClubSport Universal Hub for Xbox One, please read this manual for important information regarding your health and how to safely use this product. This manual can also be used as a great tool for future reference.

  • Page 3: Table Of Contents

    INDEX 1. General ....................2. Introduction ................... 3. Compatibility ..................4. Preparation .................... 4.1 Package contents ................4.2 Tools ....................4.3 Part list ..................... 4.4 Firmware and driver update ............5. Getting started ..................10-14 5.1 Functions ..................10-12 5.2 Usage on Xbox One console ............
  • Page 4 WARNING! Photosensitive Seizures A very small percentage of people may experience a seizure when exposed to certain visual im- ages, including flashing lights or patterns that may appear in video games. Even people who have no history of seizures or epilepsy may have an undiagnosed condition that can cause these „pho- tosensitive epileptic seizures”...
  • Page 5 ClubSport Universal Hub for Xbox One package and sold separately. • This manual explains a lot about assembly, connections and functions related to FANATEC ® wheel bases, other additional peripheral devices and also about PC or console functionalities...

  • Page 6: General

    When connecting and / or disconnecting the Universal Hub to / from compatible wheel base take care of the pins inside the quick release. • Do not try to use the Universal Hub with a wheel base beside the Fanatec compatible wheel base. •...

  • Page 7: Introduction

    The possibilities are endless! COMPATIBILITY The ClubSport Universal Hub for Xbox One can be used with all compatible wheel bases from Fanatec. It can be fitted with many popular original race car steering wheels rims from...

  • Page 8: Preparation

    PREPARATION 4.1 Package contents “F” FunkySwitch Sticker Bolt sets Universal Hub for Xbox One Small Shifter Paddles 4.2 Tools Allen key 3 mm Allen key 2,5 mm Allen key 1,5 mm Wrench 10 mm Wrench 8 mm Screwdriver , Philips 0x50 NOTE: Required tools are not included in Universal Hub for Xbox One package!!

  • Page 9: Part List

    You must also use the latest driver version in order to use the wheel base and Universal Hub for Xbox One on a PC. IMPORTANT: Install the latest drivers and update the firmwares of your Fanatec hardware where applicable before first use of the ClubSport Universal Hub for Xbox One.

  • Page 10: Getting Started

    GETTING STARTED 5.1 Functions Basically all functions of the wheel base can be used. Centre calibration: If a centre calibration is needed when using the Universal Hub for Xbox One you need to enter the Tuning Menu by using the small black button on top of the Universal Hub for Xbox One as shown on the picture: When Tuning Menu is active then press the buttons...
  • Page 11 ® mode is indicated by a blue lit status LED or text on compatible Fanatec wheel bases that feature an OLED display. Not applicable for every Fanatec wheel base. Please check the individual user manual of your Fanatec wheel base.

  • Page 12: Usage On Xbox One Console

    ....Neutral position ..... . .Reverse .

  • Page 13: Usage On Playstation ® 4 Console

    ® IMPORTANT: We strongly recommend checking if the game you have chosen supports the Fanatec wheel bases by FAQs on game websites and / or with our Fanatec customer support team. NOTE: After completing a firmware update of your compatible Fanatec wheel base, the wheel base may initially start in Xbox mode.

  • Page 14: Peripheral Devices At Consoles

    5.4 Peripheral devices at consoles To use further peripherals like pedals or shifters on consoles these devices must be connected to the Fanatec wheel base and the wheel base is the only device connected to the console. NOTE:...

  • Page 15: Assembly

    (depending on wheel rim to be used) • Position of the FunkySwitch NOTE: The Universal Hub for Xbox One comes fully assembled to fit to the Fanatec Wheel Rim GT out-of-box and no further adjustments on button box or FunkySwitch positions are necessary.

  • Page 16: Mounting / Adjusting Funkyswitch

    Open the case of the hub by loosing the four bolts on the backside. Use Allen key 3mm Mechanical: The ClubSport Universal Hub for Xbox One comes fully assembled out-of-box. The button boxes and FunkySwitch are mounted between the main body front plate and the wheel rim.
  • Page 17 Note: The ClubSport Universal Hub for Xbox One comes fully assembled out- of-box. The following steps explain how the assembly has to be done correctly in case you want to change the number of used button boxes or adjust their posi- tions.
  • Page 18 After mechanical adjustment of the FunkySwitch you need to make sure that the arrow is located on the top side. If this is not the case you can loosen the small worm bolts and turn the FunkySwitch . Tighten the worm bolts again after adjust- ing the arrow position.

  • Page 19: Button Mapping

    BUTTON MAPPING PC, PS4 , and Xbox One* 4. Group BUT 4 3. Group BUT 3 Button Button no. PC Func. PS4 Xbox One Button Button no. PC Func. PS4 Xbox One RSB -> RB LT 100% Square (shift up) (brake) Triangle RT 100%...
  • Page 20 BUTTON MAPPING PC, PS4 , and Xbox One Button Xbox One Button LT 100% (brake) LSB -> LB (shift down) RT 100% (accelerator) RSB -> RB (shift up) VIEW MENU Button Select / Touch pad Button select start Start / Options Touch Pad Option Square...

  • Page 21: Mounting The Podium Advanced Paddle Module

    MOUNTING THE PODIUM ADVANCED PADDLE MODULE Loosen and remove the four bolts on the back of the Universal Hub main body. Detach the front cover to open the housing and have access to the connectors inside. Use Allen key 3mm Open the Universal Hub and disconnect the standard shifter paddle cables.
  • Page 22 Loosen the mounting bolts as marked red using a 4 mm Allen key to detach the standard paddle modules as shown below. Store the mounting bolts with the standard shifter paddles for later use.
  • Page 23 There are two mounting positions on the sides of the Universal Hub, depending on the used steering wheel. Position 1 - M5x16 mm bolts Position 2 - M5x12 mm bolts NOTE: Bolts are included in the Podium Advanced Paddle Module package contents. Attach the Podium Advanced Paddle Module using the appropriate bolts from the package contents depending on the mounting position and tighten them.
  • Page 24 Connect the Podium Advanced Paddle Module cables to the correct sockets. IMPORTANT: Please mind the correct direction of the plug and use no force to connect the plugs! Insert and tighten the four locking bolts again. Use Allen key 3mm ATTENTION: Be careful when positioning the cables in the cable holes of the Universal Hub to avoid pinching of the cables.

  • Page 25: Mounting The Podium Button Module Endurance

    MOUNTING THE PODIUM BUTTON MODULE ENDURANCE Loosen and remove the four locking bolts on the back of the Universal Hub main body. Detach the front cover to open the housing and have access to the connectors inside. Use Allen key 3mm Open the Universal Hub and connect the DataPort-C to RJ12 adapter to the connector as shown below:...
  • Page 26 After connecting, position the adapter carefully in a lower hole to prevent damage to the cable. ATTENTION: To use the Podium Button Module Endurance with shifter paddles, they must be attached to the rearward set of mounting holes. Insert and tighten the four locking bolts again. Use Allen key 3mm ATTENTION: Carefully position the adapter cable in one of the cable...
  • Page 27 Now position the Podium Button Module Endurance on the front-plate together with the Wheel Rim. Use the longer mounting bolts that are included in the Podium Button Module Endurance package and tighten down the Wheel Rim. Connect the Podium Button Module Endurance to the installed adapter. IMPORTANT: The Podium Button Module Endurance is only suitable for steering wheels with a 6x70mm hole pattern.

  • Page 28: Wheel Rim

    S3 (M5 x 16 mm) which are included in the Universal Hub for Xbox One package. The Fanatec wheel rims come with the correct bolts. In case your wheel rim does not have holes yet you can use the drilling template on the next page to drill the correct hole pattern.

  • Page 29: Drilling Template

    DRILLING TEMPLATE ATTENTION: The maximum torque on the steering wheels bolts must be 3 - 5 Nm, otherwise the thread can be damaged. Please use Loctite. Please print this page in 1:1 scale (100%).

  • Page 30: Shifter Paddles

    6.4 Shifter paddles The Universal Hub for Xbox One package contains small shifter paddles, large shifter paddles are assembled by default to the Universal Hub for Xbox One. It is up to your taste which size of paddles you prefer and in which direction you want to mount them.
  • Page 31 Large shifter paddles Note: The Universal Hub for Xbox One comes with assembled large shift- er paddles out-of-box. Large shifter paddles adjustments Different positions for large shifter paddles...
  • Page 32 The large and small shifter paddles are both mounted onto the shifter paddle boxes on the left and right side of the Universal Hub for Xbox One. Even these shifter paddle boxes give the user the opportunity for adjustment: define the distance between wheel rim and shifter paddles according to your individual fondness.

  • Page 33: Tuning Display

    (e.g. [SEN] Maximum Steering Angle, [FF] Overall FFB Strength, [NDP] Natural Damper), or for calibration of the H-pattern Fanatec shifters like CSS or CSS SQ. ATTENTION: Take care for the pins and make sure they fit properly into the sockets to avoid damage! The tuning display can be used in horizontal or vertical position.

  • Page 34: Electronic Connectors

    ELECTRONIC CONNECTORS Paddle Shift Left Paddle Shift Right Button Button Function Xbox One Button Button Function Xbox One no. PC no. PC 1 Shift L 1 Shift R *P APM / **CS MPM Left *P APM / **CS MPM Right Button Button Function...
  • Page 35 Always up! 1. FunkySwitch / d-Pad Action Button no. PC Function PS4 Xbox One 1 Turn clockwise 1 Turn counter-clockwise Cross / Game Specific 3 Press button Guide Button 1 d-pad left d-pad left d-pad left d-pad left d-pad right d-pad right d-pad right d-pad right...
  • Page 36 2. Group BUT 2 Button Button no. PC Func. PS4 Xbox One Game Specific Left button Button 2 Middle button Cross Right button Options MENU...
  • Page 37 3. Group BUT 3 Button Button no. PC Func. PS4 Xbox One RSB -> RB Left button (shift up) Middle button RT 100% Right button (accelerator)
  • Page 38 4. Group BUT 4 Button Button no. PC Func. PS4 Xbox One LT 100% Left button (brake) Middle button LSB -> LB Right button (shift down)
  • Page 39 5. Group BUT 5 Function Button Button no. PC Xbox One Left button Middle button Right button...
  • Page 40 6. Group BUT 6 Button Button no. PC Func. PS4 Xbox One Left button Touch pad Button VIEW Middle button Square Right button Triangle...

  • Page 41: Cleaning

    Universal Hub for Xbox One the auto calibration base to the latest firmware version which can be is not working properly. downloaded from www.fanatec.com/support/faq. Try to use another steering wheel like the RFormula or RBMW. If the auto calibration is not working properly with this rims the wheel base might be damaged.

  • Page 42: Trademarks

    ” is a registered trademarks of MOMO Srl., Italy. All rights reserved. ® “OMP ” is a registered trademarks of OMP Racing Spa, Italy. All rights reserved. ® “FANATEC ” and “Endor ” are registered trademarks of Endor AG/Germany. ®...

  • Page 43: Ecology Advice

    ECOLOGY ADVICE In the European Union: At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. Depending on their characteristics, the materials may be recycled.

  • Page 44: Fcc Compliance

    FCC COMPLIANCE This device complies with part 15 of the FCC rules. The operation of this device is subject to the following two conditions: • This device may not cause harmful interference, and must accept any interference received, including interference that may cause undesired operation.

  • Page 45: Warranty

    WARRANTY Please check the FAQ database at www.fanatec.com/support/faq to see if your problem can be solved there. Normally, the warranty period is one year. How- ever, this may differ depending on the respective state. 1) Endor AG grants for the hardware product – as extension of shorter na- ®...

Table of Contents