Related Manuals for Camp Chef Pro 90X
Summary of Contents for Camp Chef Pro 90X
- Page 1 How to change the Valves/Igniter on the Pro90X – Pro60X Warning: Before you begin make sure the item is removed from the propane tank.
- Page 2 To remove all the knobs from the front of the stove, just pull straight out...
- Page 3 Remove all the screws that secure the front face plate. Pull off and set aside.
- Page 4 Undo the bolts screw on the bottom of the valve connecting it to the manifold. The manifold will then fall Remove the igniter wires to each of the valves. Note: After putting the stove back together, you will want to make sure the ignition knob is aligned correctly with the prong on the ignitor.
- Page 5 Unscrew the valve from the burner. Please note that the spring and the vent will come off too.
- Page 6 If after troubleshooting with this manual, if you are still experiencing problems, please contact out customer service department. Our agents will be happy to help. You can contact them at 1-800-650-2433 Note: The Manufacture is not liable for any replacement parts, equipment, and/or injury due to improper installation or modification.
Need help?
Do you have a question about the Pro 90X and is the answer not in the manual?
Questions and answers