Advertisement
Quick Links
H-6972, H-6973
π
H-6974
BOOKCASE –
UNASSEMBLED
TOOLS NEEDED
Flat Head
Rubber Mallet
Screwdriver
1
CAUTION: Use caution when handling and
assembling metal parts. Metal may have sharp
edges or corners. Use of protective gloves is
recommended when assembling product.
NOTE: Assemble the unit on level surface.
2-person assembly is recommended.
PAGE 1 OF 4
1-800-295-5510
uline.com
2
3
#
DESCRIPTION
1
Left Side Panel
2
Right Side Panel
3
Left Back Panel
4
Right Back Panel
5
Top
6
Center Shelf
7
Shelf Clip
8
Bottom Shelf
9
Kick Plate
SAFETY
PARTS
4
QTY
QTY
3 SHELF
4 SHELF
1
1
1
1
1
1
1
1
1
1
2
3
4
6
1
1
1
1
• Do not exceed the recommended weight capacity
of 120 lbs. on each shelf. Always distribute weight
evenly on shelves.
• Storing heavier items on lower shelves is
recommended.
5
6
7
8
9
QTY
5 SHELF
1
1
1
1
1
4
8
1
1
1217 IH-6972
Advertisement
Related Manuals for U-Line H-6972
Summary of Contents for U-Line H-6972
- Page 1 H-6972, H-6973 π 1-800-295-5510 H-6974 uline.com BOOKCASE – UNASSEMBLED TOOLS NEEDED Flat Head Rubber Mallet Screwdriver PARTS DESCRIPTION 3 SHELF 4 SHELF 5 SHELF Left Side Panel Right Side Panel Left Back Panel Right Back Panel Center Shelf Shelf Clip...
- Page 2 ASSEMBLY BACK ASSEMBLY 3. Once all locking tabs are placed into square holes, slide the side and back panels in opposite Lay the two back panels on a flat surface. directions to fully engage the locking tabs. (See Figure 1) 2.
- Page 3 ASSEMBLY CONTINUED TOP ASSEMBLY 3. Using a flat head screwdriver, bend the tab on the bottom of the side panel 45° inward to lock the kick Begin inserting the posts on the top (5) into the plate in place. (See Figure 5) channels on the right and left side panels.
- Page 4 ASSEMBLY CONTINUED 4. Tap the top down around the edges with a rubber 4. Tilt the shelf down until it rests on the shelf clips. If mallet until the locking tabs on the side and back the shelf is uneven, reposition the shelf clips into panels snap into the square holes on the supports.
Need help?
Do you have a question about the H-6972 and is the answer not in the manual?
Questions and answers