Power Save Mode (Standby Mode); Lcd Panel/Viewfinder (Evf) Settings - Leica SL2 Instruction Manual

POWER SAVE MODE (STANDBY MODE)

EN
The camera will switch to the power-saving standby mode after a
preset time to extend battery life if this function is activated.
The device has two power save levels.
– Standard Save mode:
Activates device standby mode in
3 s/5 s/10 s/2 min/5 min/10 min
– Automatic LCD panel shutdown (see p. 75)
STANDARD SAVE MODE
Factory setting:
2 min 2 min
▸ Select
Camera Settings Camera Settings
▸ Select
Power Saving Power Saving
▸ Select
Auto Power Off Auto Power Off
▸ Select the desired setting
( , , , ,
Off Off 3 s 3 s 5 s 5 s 10 s 10 s 2 min 2 min
Note
• The camera can be woken from standby mode at any time by
pressing the shutter button or by switching the main switch off
and on again.
72
in the main menu
, , )
5 min 5 min 10 min 10 min

LCD PANEL/VIEWFINDER (EVF) SETTINGS

The camera comes equipped with a 3.2" liquid crystal color panel,
which is protected by a glass cover made of extremely hard and
scratch-resistant Gorilla glass.
®
The following functions can be configured and used individually:
– Use of the LCD panel and EVF (electronic viewfinder)
– Eye sensor sensitivity
– Brightness
– Color rendering
– EVF Frame Rate
– Automatic LCD panel and EVF shutdown