Table of Contents
Advertisement
4.4.1
In-wall mounting
1. At the desired location, mark mounting opening according to the size of the in-wall mounted housing
with the help of a spirit level, then ream out the mounting opening.
Important: the mounting opening must be reamed out exactly since the decoration cover (broken
line in
Fig.
and on the top and bottom side only 8.5 mm.
m
9 m
Fig. 5:
2. Knock out the desired cable entry of the in-wall mounted housing and insert the CAN BUS cable
(shielded four-wire cable, 0.34 mm
through the wall opening to the steam generator or to the Condair Delta SPA Control Box.
Fig. 6:
5) overlaps the mounting opening on the right side only 4 mm, on the left side only 9 mm
m
4 m
m
0 m
1 0
m m
8 7
Cavity wall
Tmin: 15 mm
T
Making the mounting opening for the in-wall mounted housing
Inserting the CAN BUS cable
m
9 m
per wire) into the in-wall mounted housing. Then, lead the cable
2
m
4 m
m
0 m
1 0
m m
8 7
Massive wall
Tmin: 35 mm
T
11
Advertisement
Table of Contents
