Advertisement
Quick Links
OPERATING
RT7 RF
WIRELESS 7 DAY PROGRAMMABLE
ROOM THERMOSTAT AND RECEIVER
Overview ..................................................................................................1
Controls and display ...............................................................................1
Settings .....................................................................................................1
Initial power up ..................................................................................................1
Pairing procedure .............................................................................................2
Programming ...........................................................................................2
Set day and clock ..............................................................................................2
Set the program day .........................................................................................2
Set the program Comfort period .....................................................................2
Temperatures setting .........................................................................................3
Operating .................................................................................................3
Mode selection and description ......................................................................3
Manual: a temporary change ..........................................................................3
Boost ....................................................................................................................3
Factory settings ...................................................................................................4
Troubleshooting .......................................................................................4
Technical specifications .........................................................................4
What is a room thermostat......................................................................4
OVERVIEW
Thank you for purchasing our RT7 RF, wireless
7 day programmable digital room thermos-
tat.
It is by listening to your requirements we
have created and designed our products
to be easy to operate and install.
It is this ease of operation that is intended
to make your life easier and help you save
energy and money.
RTE7RFa NEO ENG FP V02 29 05 2015
INSTRUCTIONS
CONTROLS AND DISPLAY
• Thermostat
Batteries
compartment
Mode slider
Tu
Programming
slider
Programming sliders sequences:
Time/day
Day to be programed
Comfort temperature
Eco temperature
• LCD Display
Pairing icon
Advanced
settings
Measured room
temperature
Lock
function
Mode
indicator
Hour
SETTINGS
INITIAL POWER UP
1- To start: insert the two AA bat-
teries provided into the battery
compartment.
O nce batteries are fitted all
symbols will be displayed on
the LCD screen as shown for
two seconds.
Note: When the batteries must be changed, a low battery level indicator
appears on the device.
Remember to take used batteries to battery collection points so they can
be recycled.
LCD display
C
Rotary dial
Reset
C
am
button
RF test button
Enter/boost
button
Comfort period setting
Run
Programmed
Comfort period
Low battery
icon
Frost protection
icon
Call for heat
icon
Text informations
Temperature
setpoint
Days
Comfort
Eco
icon
2- After 2 seconds, the LCD will
show:
- The ambient temperature (°C)
solid.
- RF icon flashes.
or
mode
1
Advertisement
Related Manuals for Neomitis RT7 RF
Summary of Contents for Neomitis RT7 RF
- Page 1 CONTROLS AND DISPLAY • Thermostat OPERATING INSTRUCTIONS Batteries LCD display compartment RT7 RF Mode slider WIRELESS 7 DAY PROGRAMMABLE Rotary dial Reset ROOM THERMOSTAT AND RECEIVER button Programming slider RF test button Enter/boost button Programming sliders sequences: Time/day Day to be programed Comfort period setting...
- Page 2 3- The time setting is flashing. 4- To set the current time, turn the PAIRING PROCEDURE dial clockwise, to increment the time, turn the dial counter-clo- The thermostat and the receiver are not bonded together at the facto- ckwise, to decrement the time. To bond the transmitter and the receiver together, proceed as below: 1- Press and hold for 5 seconds 2- Within 1 minute, press and hold for 5 seconds the RF test button the RF test button on the receiver. RF test green light is on the thermostat.
- Page 3 OPERATING 3- T o set the first Comfort end 4- Turn the dial to set the time. MODE SELECTION AND DESCRIPTION time, move the Programming Move the Program slider to the slider to position next position to confirm/finish Mode sliders sequences: The default time is 8:30am. this setting. Auto mode Comfort mode Economy mode Standby. AUTO: Automatic mode. The unit is controlling to the time and temperature program that have been selected (re- fer to "programming"...
- Page 4 Creating innovative solutions for ambient comfort NEOMITIS LIMITED - 4th Floor, Lincoln House, 300 High Holborn, London WC1V 7JH ® Registered in England and Wales No: 9543404 www.neomitis.com Tel: +44 (0) 2071 250 236 - Fax: +44 (0) 2071 250 267 - E-mail: contact_uk@neomitis.com...
Need help?
Do you have a question about the RT7 RF and is the answer not in the manual?
Questions and answers
Can you only have one fixed comfort temperature which has to be the same for each comfort period of time or can I have several different temperatures as in one different one for each comfor time period
Yes, the Neomitis RT7 RF allows multiple fixed comfort temperatures for different comfort time periods. The factory settings include three comfort periods with specific start and end times, each maintaining a set comfort temperature.
This answer is automatically generated