Advertisement
Quick Links
Align™ Adjustable Height
Align™ is a trademark of Lista International Corporation.
Making Workspace Work® is a trademark of Lista International Corporation.
Creation Date
Document Number
12/29/2004
MD032A3
This manual is proprietary information of Lista International Corporation. Unauthorized reproduction of any portion of this
manual is prohibited without the written consent of Lista International Corporation. The material in this manual is for
informational purposes only. It is subject to change without notice. Lista International Corporation assumes no responsibility for
any typographical errors contained in this manual.
© 2004 by Lista International Corporation, all rights reserved
106 Lowland Street
Holliston, MA 01746-2094
E-mail: sales@listaintl.com
All rights reserved.
For questions or technical support, call 1-800-722-3020
ISO 9001 Certified
Workbench
formerly Ergomation EDG workbench
Instructions for Assembly
Motorized Base
Hand-Crank Base
Slide Leg Base
Align 500
Rev
0
Description
Align Adjustable Height Workbench
page 2
page 4
page 6
page 8
Advertisement
Summary of Contents for Lista Align
- Page 1 This manual is proprietary information of Lista International Corporation. Unauthorized reproduction of any portion of this manual is prohibited without the written consent of Lista International Corporation. The material in this manual is for informational purposes only. It is subject to change without notice. Lista International Corporation assumes no responsibility for any typographical errors contained in this manual.
- Page 2 Motorized Base - Center Justified Tools Required • 3/16" Hex • 5/32" Hex • 7/16" Wrench • Phillips head screwdriver Completed View STEP 2 STEP 1 STEP 3 a) Stand frame on feet a) Attach foot to leg using a) Attach BRKT2001 to (2) b) Attach side bracket to (4) 5/16"-18 x 2"...
- Page 3 Motorized Base - Rear Justified Tools Required • 3/16" Hex • 5/32" Hex • 7/16" Wrench • Phillips head screwdriver Completed View STEP 3 STEP 2 STEP 1 a) Attach front deck support to a) Stand frame on feet a) Attach foot to leg using (4) side bracket using (2) 1/4"-20 x b) Attach side bracket using (3) 5/16"-18 x 2"...
- Page 4 Hand-Crank Base -Center Justified Tools Required 3/16" Hex 5/32" Hex (2) 7/16" Wrenches Hammer Completed View Needle Nose Pliers STEP 1 STEP 2 STEP 3 a) Attach foot to leg using a) Attach side bracket using a) Attach BRKT2001 to (2) (4) 5/16"-18 x 2"...
- Page 5 Hand-Crank Base - Rear Justified Tools Required • 3/16" Hex • (2) 7/16" Wrenches • Hammer • Needle Nose Pliers • 5/32" Hex • Completed View 7/16" Wrench STEP 3 STEP 1 STEP 2 a) Attach foot to leg a) Attach front deck support a) Stand Frame on feet.
- Page 6 Slide Leg Base - Center Justified Tools Required • 3/16" Hex • 5/32" Hex • Completed View 7/16" Wrench STEP 3 STEP 1 STEP 2 a) Attach side bracket to front a) Attach foot to leg using a) Attach rear fixing frame of frame using (3) 5/16"-18 (4) 5/16"-18 x 2"...
- Page 7 Slide Leg Base - Rear Justified Tools Required • 3/16" Hex • 5/32"” Hex • Completed View 7/16" Wrench STEP 3 STEP 2 STEP 1 a) Stand frame on feet a) Attach foot to leg using (4) a) Attach rear fixing frame b) Attach side bracket using 5/16"-18 x 2"...
- Page 8 Align 500 - Rear & Center Justified Tools Required • 3/16" Hex • 1/2" Wrench Completed View STEP 1 STEP 2 STEP 3 a) Attach side bracket using (3) a) Attach rear fixing frame a) Attach foot to leg using (4) 5/16"- 5/16"-18 x 5/8"...
Need help?
Do you have a question about the Align and is the answer not in the manual?
Questions and answers