Panasonic CF-VEB Series Operating Instructions Manual page 5

Connecting
1 Turn the computer off.
Do not connect the Mini Port Replicator in
standby or hibernation mode.
2 Connect the Mini Port Replicator to the connec-
tor of the computer with "This side up" facing
upwards.
Disconnecting
1 Turn the computer off.
Do not disconnect the Mini Port Replicator in
standby or hibernation mode.
While pushing the Mini Port Replicator's lock
2
button, pull the Mini Port Replicator out straight.
CAUTION
You cannot use the LAN port or the external display port on the computer when the
Mini Port Replicator is connected to the computer. Connect the LAN cable, the ex-
ternal display cable, or the AC adaptor to the ports or jack on the Mini Port Replicator.
If devices connected to USB ports (2a, 2b, 2c) does not operate:
· In the case of devices with consumption voltage exceeding 100 mA, or devices for
which the consumption voltage cannot be confirmed, connect via USB port 1 or the
computer's USB port.
· Try disabling the power saving function on the USB 2.0 hub. For information about
enabling/disabling the power saving function, refer to the computer's Operating
Instructions.
When you use the computer that [USB Port] is displayed in [Advanced] menu of the
Setup Utility, confirm that [USB Port] is set to [Enable].
For more information about the settings and preparations of the peripheral devices,
refer to the peripheral devices' own operating instructions.
ENGLISH
(For information about the position of the Mini Port Replicator
connector, refer to the computer's Operating Instructions.)
Mini Port Replicator
Connector