Whirlpool LBR5432JQ0 Use And Care Manual
  1. Manuals
  2. Brands
  3. Whirlpool Manuals
  4. Washer
  5. LBR5432JQ0
  6. Use and care manual
Whirlpool LBR5432JQ0 Use And Care Manual

Whirlpool LBR5432JQ0 Use And Care Manual

Two speed automatic washers
Hide thumbs
Table of Contents

Advertisement

Quick Links

®
TWO SPEED
AUTOMATIC
WASHERS
Use & Care Guide
For questions about features, operation/performance,
parts, accessories or service call: 1-800-253-1301
In Canada, for assistance call: 1-800-461-5681,
for installation and service call: 1-800-807-6777
or visit our website at
www.whirlpool.com or www.whirlpool.com/canada
Table of Contents.................................................................2
3953954

Advertisement

Table of Contents
loading

Related Manuals for Whirlpool LBR5432JQ0

Summary of Contents for Whirlpool LBR5432JQ0

  • Page 1 WASHERS Use & Care Guide For questions about features, operation/performance, parts, accessories or service call: 1-800-253-1301 In Canada, for assistance call: 1-800-461-5681, for installation and service call: 1-800-807-6777 or visit our website at www.whirlpool.com or www.whirlpool.com/canada Table of Contents...2 3953954...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS WASHER SAFETY ... 3 PARTS AND FEATURES ... 4 USING YOUR WASHER ... 5 Understanding Washer Cycles ...5 Loading...5 Normal Washer Sounds ...5 Starting Your Washer ...6 Selecting a Cycle and Time ...7 Rinse and Spin ...8 Drain and Spin...8 Adding Liquid Chlorine Bleach ...8 Adding Liquid Fabric Softener ...8...

  • Page 3: Washer Safety

    Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”...

  • Page 4: Parts And Features

    This manual covers several different models. The washer you have purchased may have some or all of the parts and features listed below. 1. Control panel 2. Model and serial number label 3. Liquid fabric softener dispenser † 4. Agitator 5.

  • Page 5: Using Your Washer

    USING YOUR WASHER Understanding Washer Cycles When the Cycle Control knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down. During agitation, the agitator (on some models) creates a continuous rollover action that provides a thorough cleaning of the wash load.

  • Page 6: Starting Your Washer

    Starting Your Washer Fire Hazard Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.

  • Page 7: Selecting A Cycle And Time

    6. Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest water safe for fabric. Follow garment label instructions. Water Temp Use For Whites and pastels 111°F (44°C) Heavy and greasy soils or above Warm Bright colors...

  • Page 8: Rinse And Spin

    Quick Wash cycle This cycle features low-speed agitation for gentle soil removal, while providing high spin speeds to shorten drying times. Select this cycle for small loads of lightly soiled items that you need in a hurry. Soak cycle This cycle features brief periods of agitation and soak time to remove heavy soils and stains that need pretreatment.

  • Page 9: Water Inlet Hoses

    Water Inlet Hoses Replace inlet hoses after five years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found. When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.
  • Page 10 Washer makes noise Is the load balanced and the washer level? The wash load should be balanced and not overloaded. The washer must be level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed).

  • Page 11: Assistance Or Service

    Whirlpool designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States. To locate the Whirlpool designated service company in your area, you can also look in your telephone directory Yellow Pages. For further assistance...

  • Page 12: Warranty

    For five years from the date of purchase, when this washer is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for FSP replacement parts for any top and lid rust and any part of the gearcase assembly, if defective in materials or workmanship.

Table of Contents