Sony CCMA-2DAR Connection Manual

Microscope Connection Guide for the CCMA-2DAR Adapter
Connecting to the Carl Zeiss Meditec LUMERA-700
Connection
Insert the adapter into the
3
microscope (gently with both
hands).
Attach the camera head while
7
turning it.
and the MCC-1000MD
1
Preparation
2
Operating Procedure
Pull off the microscope cap.
1
Turn the black dial on the
4
microscope to tighten it.
Connect the camera cable to the camera head. *Align the cable slot with the top
8
of the camera head, and turn the cable ring to secure it.
Insert two AA batteries into the
1
controller.
Remove the side body adapter cap
5
while turning it.
Print the chart for adjusting the
2
viewing angle position onto
A4-size paper. You will find the
chart attached to this guide.
Remove the front lens adapter cap.
2
Remove the head cap.
6
Connect the controller by pushing
9
it in until it clicks; it is not
necessary to turn it.