Zoom Rooms - Crestron TSW-560 Supplemental Manual

Zoom Rooms

To set up the Zoom Rooms conferencing control or Zoom scheduling application on the
touch screen:
NOTE: A Zoom Rooms account is required to use this application. For more information
and to register an account, visit www.zoom.us.
1. Access the touch screen web configuration interface. For more information, refer
to "Configuration via Web Interface" on page 27.
2. Navigate to Settings > Applications.
3. Select Zoom Rooms from the Application Mode drop-down menu.
Settings - Applications (Zoom Rooms)
4. Configure the following Zoom Rooms settings as needed. These settings may be
edited at any time.
Zoom Room Page Flip: Toggle the switch to enable or disable the user's
•
ability to toggle between Zoom Rooms mode and a custom user project.
Time Out Control: Set the automatic flip behavior for the Zoom Rooms
•
application, which occurs after the duration set in the Flip Back Time field.
‒
‒
‒
Flip Back Time: Enter a duration (in minutes) before the automatic flip
•
behavior occurs.
5. Reboot the touch screen. The Zoom Rooms application user interface is displayed
on the touch screen following the reboot.
56 • TSW-560/TSW-760/TSW-1060: Touch Screens
Disabled: When selected, automatic flip behavior is disabled.
Flip To Project: When selected, the screen automatically flips to the user
project after the time out duration elapses. Press the home button
(second hard key from top right) on the touch screen to flip back to the
Zoom Rooms application.
Flip To Mode: When selected, the screen automatically flips to the Zoom
Rooms application after the time out duration elapses. Press the home
button on the touch screen to flip back to the user project.
Supplemental Guide – DOC. 7927G