Mpow H17 Faq

We have sorted out some problems of Mpow H17 Noise Cancelling Headphones that you may
concerned about:

About Noise Cancelling Function

Q: Why are my noise-cancelling headphones so bad that I can still hear people talking?
A: Noise canceling technology is mainly for low-frequency noise such as some car engines,
airplane cabin noise or city traffic. Please note vocal and high-frequency noise cannot be
eliminated.
Q: Why is the sound quality of my headphones not very good with ANC on ?
A: Noise cancelling technology eliminates most of the ambient noise by generating reversed
sound waves, allowing us to hear more pure and undisturbed sounds, so at some level, people
may feel that the sound quality is not as good as expected.
Q: Is there a separate switch for noise reduction?
A: Yes, you can turn on ANC button when you need it.

About Bluetooth Connection

Q: How to connect with phone/computer?
1. With your headphones powered off, long press Bluetooth button for 5 seconds until Red &
Blue light flash alternately
2. Turn on the Bluetooth of your device and find " Mpow +Model (E.g. MPOW H17) " to
connect (Enter the code 0000 if needed)
Q: Can the Headphones be connected to TV?
A: If your TV has Bluetooth, you can connect directly. If not, then you need a Bluetooth
transmitter to connect.
Q：How to Clear Paring Record？
A： With your headphones powered on,press and hold the Volume" + " and Volume"－"buttons
simultaneously for 5 seconds. You will hear two beeps and the headphones will re-enterin to
paring mode.

About Charging

1.Please turn off the ANC function when not in use.(ANC function will consume power when it is
turned on)
2.The headphones will be off when charged.