Advertisement
EG 6000 Q
UICK
About this Guide
This Quick Start Guide provides instructions and reference material for getting started with the
Nomadix Edge Gateway Products.
Documentation and Technical Support
For more detailed information about the individual gateways and all other Nomadix Product
Documentation, User Guide, XML DTD, MIB and Radius Dictionary can be found using the
following URL:
http://www.nomadix.com/technical-support-documentation
If you have any problems, please contact our technical support team at +1.818.575.2590, or via email:
support@nomadix.com
Accessory Box Contents
The EG 6000 is shipped with the following Accessory Box to assist with product installation.
Contents varies depending on what was ordered.
Qty
1
1.8m U.S. (NEMA 5-15p) Power Cord (Type B): United States, Canada,
Mexico and Japan
1
19" Rack Mount Brackets Kit and screws.
1
Bumper Kit for desktop installations.
Part Number
Console Cable
715-4001-001
715-4001-003
Country
715-4001-004
Specific
715-4001-005
Power Cables
715-4001-006
715-4001-007
PMS
715-5001-001
1
The console port is typically used only in rare situations where the Gateway is not reachable via the Network. It is not required to initialize the
Gateway or reset Administrative passwords.
February 2020B
S
G
TART
UIDE
Included with the EG 6000
Description
optional Items available separately
Description
1.8m USB to DB9 Console Cable
Power Cord - C13 to CEE 7/7 - 1.8m - EU/RU
Power Cord - C13 to NEMA 5-15P - 1.8m - US/CA/MX/JP
Power Cord - C13 to BS 1363-1/SASO 2203:2003 - 1.8m - UK/IE/SG/HK/Arabia
Power Cord - C13 to GB2099, AS/NZS 3112 - 1.8m - CN/AU/NZ/AR
Power Cord - C13 to SABS 164-1 - 1.8m - IN/ZA
PMS Serial Hardware Integration Kit
Information subject to change without notice.
Other countries are sold separately.
1
Comments
1
Advertisement
Table of Contents
Related Manuals for Nomadix EG 6000
Summary of Contents for Nomadix EG 6000
- Page 1 If you have any problems, please contact our technical support team at +1.818.575.2590, or via email: support@nomadix.com Accessory Box Contents The EG 6000 is shipped with the following Accessory Box to assist with product installation. Contents varies depending on what was ordered. Included with the EG 6000...
-
Page 2: Ethernet Port Connection
Install the Edge Gateway into the 19” rack. Step #1 Install the Rack Mounting Flanges to each side of the EG 6000: using the (3) 6-32 flat head screws. Do not over tighten. Step #2 Using (4) 10-32 rack mounting screws, position the EG 6000 in the rack and secure to the vertical rails. - Page 3 NONE NONE Table 2: Comm port settings. On the EG 6000 the console port is on the USB connector, requiring a console cable 715-4001-001 or equivalent. Connection methods are depicted below [illustration 2]: February 2020B Information subject to change without notice.
- Page 4 EG 6000 Q UICK TART UIDE Illustration 2: USB Console Port connections With everything connected and powered up, you are now ready to configure the configure the Gateway’s WAN for a static IP address, DHCP Client or PPPoE client using appropriate configuration guidelines that follow in order to obtain the license key.
-
Page 5: Initial (Startup) Configuration
EG 6000 Q UICK TART UIDE Initial (startup) Configuration Log in to the Gateway, by opening an SSH to 172.30.30.172 or the asynchronous comm port, using the default Login= admin password= admin. Type y[es] when prompted to configure settings. The initial minimal WAN port configuration mode will be displayed as shown in Figure 1. - Page 6 EG 6000 Q UICK TART UIDE Step 1a: Static WAN IP Configuration Accept static as the default configuration mode and enter the following mandatory settings shown in Figure 2. Figure 2: Initial WAN port settings A WAN port summary page will then be displayed as shown in Figure 3.
- Page 7 EG 6000 Q UICK TART UIDE If everything is correct in the summary, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location information. Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the WAN port settings.
- Page 8 EG 6000 Q UICK TART UIDE Step 1c: PPPoE Dynamic IP Client Configuration Enter p[ppoe] when prompted. Enter the following mandatory settings for a PPPoE connection with dynamic PPP IP configuration shown in Figure 6. Figure 6: Selecting PPPoE with dynamic IP configuration A WAN port summary page will then be displayed as shown in Figure 7.
-
Page 9: Step 2: Entering Your Location Information
The system will now prompt you to accept or decline the End User License Agreement (EULA). You must accept the terms of the EULA before the Edge Gateway can retrieve its license key. To retrieve the license key, enter y[es] as shown in Figure 9. The EG retrieves the license key from the Nomadix license key server, then reboots. February 2020B... -
Page 10: Step 4: Configuring The System
EG 6000 Q UICK TART UIDE Figure 9: License key retrieval. NOTE: The date and time the gateway receives a valid license from our server for the first time is considered the Software License Subscription start date. Step 4: Configuring the System Log in to the Edge Gateway and use the graphical Web Management Interface (WMI) to configure the product’s features. -
Page 11: Sample Network Setup
EG 6000 Q UICK TART UIDE DHCP Server Subnet Mask 255.255.255.0 DHCP Pool Start IP Address 10.0.0.12 DHCP Pool End IP Address 10.0.0.72 DHCP Lease Minutes 1440 Table 3: DHCP server configuration Sample Network Setup An example of a basic network including the Edge Gateway is shown in Figure 10...
Need help?
Do you have a question about the EG 6000 and is the answer not in the manual?
Questions and answers