Table of Contents
Advertisement
Group of features - OEM protection
Summary
Set the OEM Write Protection password
Dynadimmer
Enable
ALO
New password:
AOC
Verify password:
MTP
The password must contain 4 numbers (0-255).
CLO
Startup Time
EOL
DC Emergency
...
...
OWP
Individual features - OEM protection
Summary
OEM Write Protected features
DALI PSU
(De)select all
DALI PSU
ALO
ALO
AOC
ALO Min
X
OWP
AOC
X
ECO FactoryLink
Set the OEM Write Protection password
Enable
New password:
Verify password:
The password must contain 4 numbers (0-255).
Design-in Guide - Philips Xitanium LED Xtreme SR driver
OEM Write Protection
OEM Write Protection
OEM Write Protection (OWP)
Factory default setting: disabled
OWP can be used by the OEM to protect the change of setting of
the Philips programmable driver. Philips Drivers equipped with the
feature OWP will show this in their feature list if read out via the
MultiOne Engineering Software. The OWP feature defines a
password that will be set in the driver so the data of OEM Write-
protected features can only be written to the driver by providing
this configured password. Depending on the type of driver OEM
can protect:
• a set of features (fixed)
• a selection of individual features (free selection) To know which
features are locked you see a small lock symbol on each feature
while trying to write the driver.
How to program this feature is described in the user
manual of MultiOne Engineering at www.philips.com/multione.
The password is needed to change the protected features
of this driver. Without the password these features cannot
be modified.
Encrypted in the feature file, the password can be easy
programmed in production via the MultiOne workflow software.
New drivers or replacement drivers can be programmed on
this way. Already programmed drivers with password are
protected and will give an error. They can only be changed using
the correct password.
It is important for the OEM to set up a password
management system, keeping feature file and password together
in the BoM of the
luminaire.
is
under
the responsibility of the OEM who sets it. In
case of losing the password, the customer can take contact
with the local sales department to discuss a possible solution.
The
password
management
38
Advertisement
Table of Contents
