About This Manual; System Configuration - Sony BRS-200 Quick Reference Manual

Remote camera operating switcher

Hide thumbs Also See for BRS-200:

Table of Contents

About This Manual

Package of BRS-200

About This Manual

This Quick Reference Guide briefly explains the connections of the switcher

system and basic setups on the assumption of the system configuration below,

and it leads to the goal of viewing images shot by the cameras on the monitor.

For system configurations using other equipment and detailed operations of the

switcher, refer to the Operating Instructions prepared separately.

z BRS-200 Remote Camera Operating Switcher (Processor Unit and Control

Panel): 1 set

z Sony BRC-series VISCA cameras (with the HD-SDI output card attached):

2 units

z Monitor equipped with an HD-SDI input or DVI input: 1 unit

Before using, check that all the following components are included in the

BRS-200 package.

• Processor Unit (1)

• Control Panel (1)

• AC power cord (1)

• AC power adaptor (1)

• Power cord for AC power adaptor (1)

• Control cable (1)

• Power cord stopper (1)

• DC IN plug retainer (1) and screws (+M3 × 6) (2)

• Rack mounting bracket (1 set)

• RS-422 connector plug (1)

• Operating Instructions (1)

• Quick Reference Guide (this manual) (1)

• Warranty (1)

Table of Contents