Panasonic CF-VEB Series Operating Instructions Manual page 10

Connecting/Disconnecting
6
Select [Search for the best driver in these locations], add the check mark for [In-
clude this location in the search:], and then input [d*
7
Select [Next].
8
Select [Continue Anyway].
9
Select [Finish].
* "d" is the letter used for the CD drive. You can change the letter to suit your preference.
1
E
<For Microsoft
1
Connect the CD drive.
2
Turn on the computer.
3
Install the driver for the CD drive if necessary.
4
At [Found New Hardware Wizard], select [Next].
5
Select [Search for a suitable driver for my device], and then select [Next].
6
Add the checkmark for [Specify location], and then select [Next].
7
Place the driver CD-ROM in the CD drive.
8
At [Copy manufacturer's files from:], input [d*
9
Select [Next].
10
At [Digital Signature Not Found], select [Yes].
11
Select [Finish].
* "d" is the letter used for the CD drive. You can change the letter to suit your preference.
2
10
® ®
Windows 2000 Professional>
:\lan].
1
:\lan], and then select [OK].
2