Doorphone; Other Features - NEC SL1000 Programming Manual

Doorphone

[10-03] HBIU Configuration Setup
[10-03-01] Slot No1, HBI 6 (Physical Port 6), Type 8 (door phone)
– configure port 6&7 as door phone port
[10-03-02] Slot No1, HBI 6 (Physical Port 6), Port 1 (Logical Port)
[10-03-03] Slot No1, HBI 6 (Physical Port 6), T-Gain 32
[10-03-04] Slot No1, HBI 6 (Physical Port 6), R-Gain 32
[10-03-05] Slot No1, HBI 6 (Physical Port 6), P-Type 1 (door phone)
[10-03-06] Slot No1, HBI 6 (Physical Port 6), Line 0
[10-61] Relay Port Setup
[10-61-01] Relay 1, Relay Type 4 (door phone)
[32-02] Doorphone Ring Assignment
[32-02-01] Door 1, Mode 1, Tel 01 (Doorphone Ring Member 01) = 200 (ext)
- When visitor ring the doorphone, press FLASH to open door
- If Doorphone 1 not ring, press 8021 FLASH to open door
- If Doorphone 2 not ring, press 8022 FLASH to open door

Other Features

[14-01-07] Trunk Basic Setup – Outgoing Calls
- To enable (1) or disable (0) particular trunk from making outgoing calls.
[20-09-04] Check List – Notification for Incoming Call List Existence
- When they is a miss call, Check List will show on the screen
- 0 = disable, 1 = enable
[20-13-20] Account Code/ Toll Restriction Operator Alert (0=disable, 1=enable)
- Automatically call operator when restriction happen
[20-02-12] Multi-Line Telephone System Options – Force Intercom Ringing
- Set Intercom destination keyphone to Ring (1) or Voice (0)
[23-02-01] Call Pickup Group
[31-02-01] Internal Paging Group Assignment
4
Prepared by Voice IP Solutions (M) Sdn Bhd