Do you have a question about the B450 TOMAHAWK MAX and is the answer not in the manual?
Questions and answers
Игорь
April 3, 2025
после del и входа в биос не работают ни мышка не клава, что делать?
1 comments:
Mr. Anderson
April 3, 2025
If the mouse and keyboard do not work after entering BIOS on the MSI B450 TOMAHAWK MAX, try the following steps:
1. Clear CMOS: - Use the JBAT1 jumper or SW1 switch on the motherboard to clear the CMOS. - Alternatively, remove the motherboard battery for 1 minute and reinsert it with the power off.
2. Test Outside the Case: - Set up the motherboard outside the case on its box to avoid grounding or short issues.
3. Use Minimal Components: - Disconnect all add-on cards, drives, and extra cables. - Only connect essential components like CPU, one stick of memory, and power supply.
4. Swap Components: - Test with different processor, memory, power supply, or video card if available.
If the issue continues after all steps, consider requesting manufacturer support or warranty service.
Need help?
Do you have a question about the B450 TOMAHAWK MAX and is the answer not in the manual?
Questions and answers
после del и входа в биос не работают ни мышка не клава, что делать?
If the mouse and keyboard do not work after entering BIOS on the MSI B450 TOMAHAWK MAX, try the following steps:
1. Clear CMOS:
- Use the JBAT1 jumper or SW1 switch on the motherboard to clear the CMOS.
- Alternatively, remove the motherboard battery for 1 minute and reinsert it with the power off.
2. Test Outside the Case:
- Set up the motherboard outside the case on its box to avoid grounding or short issues.
3. Use Minimal Components:
- Disconnect all add-on cards, drives, and extra cables.
- Only connect essential components like CPU, one stick of memory, and power supply.
4. Swap Components:
- Test with different processor, memory, power supply, or video card if available.
If the issue continues after all steps, consider requesting manufacturer support or warranty service.
This answer is automatically generated