Advertisement
Quick Links
Advertisement
Related Manuals for TW Audio T24
Summary of Contents for TW Audio T24
- Page 1 RIGGING DOCUMENTATION...
-
Page 2: Table Of Contents
RIGGING ELEMENTS page 3 • RIGGING SETUPS page 6 • 1. Single Box rigging page 7 2. Two or more Boxes page 7 3. Cluster rigging page 10 4. Rigging clusters page 12 page 2... -
Page 3: T24 Rigging Elements
T24 itself and can only be moun- ted in one direction. BBT24 – the Backbone of the T24. This part gives you the stability you need when moun- ting two or more T24 on top of each other. page 3... - Page 4 BCT24 – adapts the back- bone (BBT24) to the cradle bar (CBT24). This element is used when rig- ging two or more T24 w/out the main cradle (MCT24). The holes are also used as pinpoints in the EASE FOCUS simulation Data.
- Page 5 No – this is not a dead Octopus – this is the ASK44. The Rigging chain for the MCT24. BLT24 - the Boxlinks. Used to assemble T24s underneath each other. Now that we have gone through all the elements, let’s take it step by step… page 5...
-
Page 6: T24 Rigging Setups
RIGGING SETUPS: The basic element for all rigging setups is the CBT24. The following pictures show the correct assembling to the T24. MAKE SURE THAT THE CARGO STUDS ARE LOCKED SECURELY!!! page 6... -
Page 7: Single Box Rigging
1. Single Box rigging This is the most simple way of rigging the T24 with a CBT24. Just as the picture shows – this is a very simple way of rigging the T24. When using this rigging option, you will not have the possibility of dedicated angling. - Page 8 Open the pin to tilt the top part of the Lock the upper part of the BBT in the upper handle by re-inserting the pin. BBT24 to attach it to the upper handle. Attach the BBT to the BCT – Already con- This is how it should look like when eve- fused? Just do it like the following picture! rything was done correctly.
- Page 9 Now you can easily add up to 6 boxes underneath eachother. Therefore you need the BLT24. Pull up the Box you have already rigged up to the height where you can set one more Box underneath it. Then connect the next Box BBT to BBT and use the Boxlinks (BLT24) to angle them.
-
Page 10: Cluster Rigging
3. Cluster rigging To get a dedicated angling not only in vertical position, but also in horizontal position you can use the MCT24. With the Main Cradle it is possible to hang multiple Boxes underneath and side a side of each other. - Page 11 Attach the MCT to the top shakles of the CBT. Open the pins on the BATs and remove the adapter-part. Here you can see the two BATs prepared. They are simply attached to the BBTs via the top Pin. This has to be done on both sides!!! Attach the ASK44 to the MCT24 using the Now rig up your speaker cluster and save it shakles delivered with the ASK44.
-
Page 12: Rigging Clusters
4. Rigging clusters • When rigging e.g. 4pieces of T24 in one Cluster, it is important to bring the Loudspeakers as close together as possible at their lower end. • Set up all 4 loudspeakers on top of each other using the BBT and the BLT. - Page 13 Side View: Front View: page 13...
Need help?
Do you have a question about the T24 and is the answer not in the manual?
Questions and answers