Ash Removal; Maintenance; Cleaning Glass - Arizona Seattle Introductions For Installation And Use

always remember to make sure that there are lasting flames until the wood becomes
charcoal. If you want a weaker fire, stoke up using less wood.
If you fire the stove using wet wood, a lot of the fuel's thermal energy will be spent forcing
the water out of the wood, without releasing any heat to the stove. This incomplete
combustion results in a layer of soot being left in the stove, pipe and chimney.

3.2.3 Ash removal

figure 5(how to put out ashpan)
It is essential to keep the grate free from a heavy build up of ashes. This product is equipped with a
grate riddling device which is used to "shake" ashes off the grate into the ash pan. Whenever the stove
is burning without life when the lower control is open, use the riddling lever to clear the grate of
surplus ashes.
If burning solid fuel, always empty the ash pan at least once a day or whenever it is full of ashes.
Never allow the ashpan to overfill allowing ash to be in contact with the underside of the grate. If this
condition is allowed, the grate will wear out pre-maturely.

3.3 Maintenance

The regular maintenance by a competent engineer recommended.

3.31 Cleaning glass