Related Manuals for UEi Phoenix Series
Summary of Contents for UEi Phoenix Series
- Page 1 INSTRUCTION MANUAL 1-800-547-5740 • Fax: (503) 643-6322 www.ueitest.com • email: info@ueitest.com...
-
Page 2: Safety Notes
• If any of the following indications occur during testing, turn off the power source to the circuit under test: • Arcing The Phoenix Series is a hand-held, battery powered digital multimeter • Flame with clamp-on current measuring capability, back light and work •... -
Page 3: Displays And Indicators
A DP (top display) M aximum value displayed 9. Upper Display (DL279/DL289 only): Used to display current Low battery symbol when used with UEi clamp or hook adapter. Displays output from Hold function activated other accessories when connected to the UEi meter. - Page 4 MIN/MAX mode Measuring AC, DC or µA When using the MIN / M AX capture mode for Amps, it is recommended NOTE: Meter must be in series for µA measurements. Press “SELECT” to that you first select the range of the expected maximum value. If this change AC or DC source.
- Page 5 M a i n t e n a n c e Ohms Measurement Range Resolution Accuracy Overload Protection Periodic Service 100m ±1.0% +4 dgts 600V WARNING! 400k Repair and service of this instrument is to be performed by qualified ±2.0% +4 dgts personnel only.
-
Page 6: Limited Warranty
UEi’s option. This warra n ty covers normal use and does not cover damage which occurs in shipment or failure which results from alteration, tampering, accident, misuse, abuse, neglect or improper maintenance.
Need help?
Do you have a question about the Phoenix Series and is the answer not in the manual?
Questions and answers