Summary of Contents for XU1 XRS-710
- Page 1 XU1 Power tools 1–23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 XRS-710 0718...
- Page 2 ADDITIONAL SAFETY Safety Warnings Common for Description of symbols Reciprocating Saw Operations: WARNINGS FOR a) The use of a residual current device Read instruction manual RECIPROCATING SAWS with a rated residual current of 30mA or less, is Wear eye, breathing and hearing recommended.
- Page 3 1 Adjustable Pivoting Shoe 5 Lock-On Button 9 Metal Cutting Blade 2 Tool Free Blade Holder 6 Soft Grip Rear Handle 10 Wood Cutting Blade 3 Front Grip 7 Power Cord 4 ON/Off Trigger 8 Hex Key...
-
Page 4: Specifications
2. Press the On/Off Trigger to start the reciprocating saw before beginning operation. and gently apply downward force to begin cutting. Your XU1 Reciprocating Saw is an extremely versatile 3. When you have finished cutting, release the On/Off tool designed to cut many different types of material in Blade Removal Trigger to stop the saw. -
Page 5: Maintenance
Note: XU1 will not be responsible for any damage or injuries caused by the repair of the tool by an 1 YEAR REPLACEMENT WARRANTY unauthorised person or by mishandling of the tool. -
Page 6: Safety Instructions
SAFETY GENERAL POWER TOOL d) Remove any adjusting key or wrench before turning the power tool on. A wrench SAFETY WARNINGS INSTRUCTIONS or a key left attached to a rotating part of the power tool may result in personal injury. WARNING! Read all safety e) Do not overreach. - Page 7 ADDITIONAL SAFETY Safety Warnings Common for Description of symbols Reciprocating Saw Operations: WARNINGS FOR a) The use of a residual current device Read instruction manual RECIPROCATING SAWS with a rated residual current of 30mA or less, is Wear eye, breathing and hearing recommended.
Need help?
Do you have a question about the XRS-710 and is the answer not in the manual?
Questions and answers