Mtr/Usb Send Point Screen Settings - Tascam 12 Manual

Model 12 operations

MTR/USB SEND POINT screen settings

The audio sent by USB depends on the Model 12 MODE switch settings and the MTR/USB SEND POINT screen settings.
For details about the MTR/USB SEND POINT screen settings, see "Selecting the positions that recording signals are sent from each
channel" under "Mixer functions" in the "9 – Other functions" chapter of the Owner's Manual.
MTR/USB SEND POINT
PRE COMP
POST COMP
POST EQ
NOTE
Regardless of the above settings, COMP/EQ is enabled for sound from the computer.
4
TASCAM Model 12 DAW Controlmode Manual
COMP EQ
Disabled Disabled
Enabled Disabled
Enabled Enabled
MODE switch Audio sent to computer
LIVE Sound from input jacks is sent.
PC Sound from input jacks is sent.
MTR Sound from input jacks is sent.
LIVE Sound from input jacks is sent.
PC Sound from computer is sent.
MTR No sound is sent.
LIVE Sound from input jacks is sent.
PC Sound from computer is sent.
MTR No sound is sent.