Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Spooky2 Scalar
- Page 1 Spooky Scalar Digitizer INSTRUCTION November 2018 Spooky2 Team...
- Page 2 Brief Overview Biofeedback is a way of finding out what frequencies are best suited to your body. Spooky2 Scalar is the only Scalar device capable of doing biofeedback scan. Spooky2 Scalar Digitizer measures tiny changes in the scalar field during a scalar frequency scan.
- Page 3 Connect the link cable and power cable of Spooky2 Scalar. Connect G1 Out 1 to the BNC port of Spooky2 Scalar Digitiz-...
- Page 4 Connect G2 Out 1 to the BNC port of the Spooky2 Scalar Transmitter. Connect GX to the computer and short press the Power button to turn on GX. Turn on and tune your Spooky2 Scalar.
- Page 5 Tip: GX must not be in the Scalar field, because the case and elec- tronics in GX are metal, which will distort the field. Please keep GX 1m away from Spooky2 Scalar Transmitter, and 1m from the scalar field. Step 2: Software Launch the Spook2 software.
- Page 6 Go to the Control tab, tick Overwrite Generator and choose G2 (Port 15) to load the settings.
- Page 7 Then, go back to the Presets tab. Select the BFB Master preset, go to the Control tab, tick Overwrite Generator, and choose G1 (Port 14) to load the preset. Lie between the two scalar units, and ask an assistant to click the Scan button to start the biofeedback scan.
- Page 8 2000. This will give you time to start the biofeedback scan and position yourself correctly between the units. G2 will automatically start, causing Spooky2 Scalar to transmit the generator frequencies. G1 will start, but no frequencies will be produced. Instead, the amount of Scalar energy being absorbed for each frequency by the body will be recorded.
- Page 9 Save. We suggest including the person’s name and date. You can edit the Notes if you wish for future reference. Spooky2 will automatically refresh the database after adding a new program. Your new program can now be searched in the Programs tab.
- Page 10 Use Spooky Scalar General (SS) - JW preset to run your scan results. Tips: It is best to lie perfectly still, and only have one person in the Scalar field. This field extends outward, so ensure no living organism is nearby.
- Page 11 Spooky www.spooky2scalar.com...
Need help?
Do you have a question about the Scalar and is the answer not in the manual?
Questions and answers