After activation, the
CCM UI screen.
If you experience any difficulty, see
5.6.2. Network RX Station
1
Select Network > Network Client Mode in the setup menu, and set Setting to On.
2
Start communication with the CCM of Network RX Station.
When communication is successful, the
thumbnails appear on the CCM UI screen.
If you experience any difficulty, see
icon appears on the camcorder LCD screen and thumbnails appear on the
"12.2. Network Client Mode"
icon appears on the camcorder LCD screen and
"12.2. Network Client Mode"
in the Troubleshooting section.
in the Troubleshooting section.
32