Download
Share
Print this page
RSi Smartcanopy EVO Fitment Instructions
  1. Manuals
  2. Brands
  3. RSi Smartcanopy Manuals
  4. Automobile Accessories
  5. EVO
  6. Fitment instructions

RSi Smartcanopy EVO Fitment Instructions

Ford ranger double cab
Hide thumbs Also See for EVO:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
FITMENT INSTRUCTIONS
FORD RANGER DOUBLE CAB
PLEASE ENSURE TO READ FITMENT INSTRUCTIONS CAREFULLY
BEFORE ATTEMPTING TO INSTALL.
LIKE SHARE FOLLOW

Advertisement

loading
Need help?

Need help?

Do you have a question about the EVO and is the answer not in the manual?

Questions and answers

Related Manuals for RSi Smartcanopy EVO

Summary of Contents for RSi Smartcanopy EVO

  • Page 1 FITMENT INSTRUCTIONS FORD RANGER DOUBLE CAB PLEASE ENSURE TO READ FITMENT INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL. LIKE SHARE FOLLOW...
  • Page 2 FITMENT KIT CONTENTS FITMENT KIT CONTENT (HARDWARE) DESCRIPTION EXAMPLE Set Screw M8 x 30 Set Screw M6 x 20 M8 Nyloc Nut M8 X 20 Fender Washers M6 X 16 Fender Washers M6 Spring Washer M8 Spring Washer 5mm Foam Strip 4.5mm Rubber Pad (Front) 4.5mm Rubber Pad (Rear) M8 Weldnut...
  • Page 3 FITMENT KIT CONTENTS & REQUIRED TOOLS FITMENT KIT CONTENT (COMPONENTS) DESCRIPTION EXAMPLE Front Mount Bracket Left Front Mount Bracket Right Rear Mount Bracket Left Rear Mount Bracket Right Front Load Spreader Plate Wire Harness Connectors Plug REQUIRED TOOLS CATEGORY TOOLS EXAMPLE NO.
  • Page 4 FITMENT OF THE RSI SMARTCAP TO VEHICLE PLEASE ADHERE TO BELOW TO PREVENT DAMAGE TO VEHICLE AND RSI SMARTCAP DURING FITMENT 1. ONLY USE THE RECOMMENDED TOOLS AS INDICATED IN THE FITMENT INSTRUCTION ABOVE 2. ONLY USE THE HARDW ARE PROVIDED IN THE FITMENT KIT OUTLINED ON THE PAGE BEFORE 3.
  • Page 5 FITMENT OF THE RSI SMARTCAP TO VEHICLE 1. POSITION THE REAR MOUNT BRACKET LEFT HAND IN THE REAR LEFT HAND CORNER OF THE LOAD BIN. STEP 2. USE TWO M8 X 30 SET SCREWS WITH M8 SPRING WASHERS AND M8 X 20 FLAT WASHERS TO LOOSELY SCREW THE BRACKET TO THE FRONT OF THE LOAD BIN.
  • Page 6 BRACKETS AS INDICATED BELOW. STEP 2. USE SIX M8 X 30 SET SCREWS WITH TWELVE M8 X 20 FLAT WASHERS AND SIX M8 NYLOC NUTS TO LOOSELY FASTEN THE RSI SMARTCANOPY TO THE FRONT EIGHT MOUNT BRACKETS THROUGH THE LOAD SPREADER PLATES.
  • Page 7 FITMENT OF THE RSI SMARTCAP TO VEHICLE STEP 1. NEATLY RUN BRAKE LIGHT HARNESS ON THE LEFT HAND SIDE INTERIOR OF THE CANOPY. NINE USE PICTURE IN FITMENT KIT. STEP 2. BEFORE FITTING PLUGS ONTO LIGHT HARNESS, THREAD THE HARNESS THROUGH THE ACCESS HOLE ON THE LEFT HAND SIDE THE VEHICLES BIN.
  • Page 8 FITMENT OF THE RSI SMARTCAP TO VEHICLE STEP 3. FIT CONNECTING PLUG ONTO THE END OF THE HARNESS OF THE REAR DOOR HIGH LEVEL BRAKE LIGHT. ELEVEN PLEASE ENSURE PLUG IS CONNECTED IN CORRECT ORIENTATION.(POSITIVE TO POSITIVE AND NEGATIVE TO NEGATIVE) Light Harness Wiring Plug STEP...
  • Page 9 2. IN THE TAIL LIGHT AREA THE PLUGS TO BE PUSHED BACK INTO ORIGINAL PLACE (NEATLY) THANK YOU FOR PURCHASING A RSI SMARTCANOPY SHOULD YOU HAVE ANY ENQUIRIES ABOUT THE FITMENT, FEEL FREE TO CONTACT US JHB +27 11 974 0370 EVO@SMARTCAP.COM...