Coopers of Stortford G687 Instructions For Use

Glow in the Dark Clock
Please read and retain these instructions for future reference
INSTRUCTIONS FOR USE:
1. The battery compartment is located on the
back of the clock on the left hand side.
Remove the cover by pressing on the tab on
one side and lifting it open. Insert 1x AA
battery (not included) with (+/-) polarity as
indicated inside then replace cover.
2. Control knobs and switches are located on
the back of the clock next to the battery
compartment. Set the correct time by
rotating the time-setting wheel (black knob at
the bottom) to the desired time. Rotate the
knob clockwise to set the correct time.
3. To set the alarm, rotate the alarm-setting
wheel (black knob in the middle) to the desired time then slide the tab at the top upwards to the ON
position. A beeping alarm will sound when the selected time is reached. To turn the alarm sound off,
slide the tab at the top downwards to the OFF position.
4. Stand the clock upright on a flat surface. The clock will make a ticking sound whilst it is running and
temperature will be displayed in degrees Celsius on the LCD screen.
G687

Dimensions:

7cm x7cm x3.5cm

Material:

ABS
Instructions for Use
v001: 17/02/20