Bluehill ® Software; Bluehill® Software; Home Screen - Instron 3400 Series Operator's Manual

Label
4
5
6
7
The white LEDs above the
Figure 14, the unlock button is available.
®
Bluehill software
The software controls:
•
setting test parameters
•
collecting and analyzing test data
Refer to the Bluehill

Home Screen

®
Bluehill software opens at the Home screen, with the following components:
Product Support: www.instron.com
RETURN button - returns the crosshead to zero displacement.
Bluehill
Return speed is set in
maximum speed for the frame.
The button is only available after the frame has transitioned to CAUTION
mode.
When you press this button, the frame runs in TESTING mode until the
return is completed.
START TEST button - press the button to start a test.
must be in the Test screen before you can start a test.
• The button is only available after the frame has transitioned to CAUTION
mode.
• When you press this button, the frame runs in TESTING mode until the test
is completed or you initiate another action.
UNLOCK button - switches the frame between the following modes:
• DISABLED to SET UP, i.e. enable the frame
• SET UP to CAUTION, e.g. prepare to start a test
EMERGENCY STOP button - press this button to disable the frame from
any mode when a hazardous situation exists. Refer to
button" on page 51.
UNLOCK , TEST
®
online help and reference for more details.
Description
®
software and can be any value up to the
and RETURN buttons indicate availability. In
®
Bluehill software
®
Bluehill
software
"Emergency Stop
53