Commercial Electric MS8332C Use And Care Manual
  1. Manuals
  2. Brands
  3. Commercial Electric Manuals
  4. Multimeter
  5. MS8332C
  6. Use and care manual

Commercial Electric MS8332C Use And Care Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

730 696
MS8332C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS8332C and is the answer not in the manual?

Questions and answers

Related Manuals for Commercial Electric MS8332C

Summary of Contents for Commercial Electric MS8332C

  • Page 1 730 696 MS8332C...

  • Page 2: Preliminary Precautions

    SYMBOLS FCC Compliance Statement Indicates important safety information Equipment protected throughout by double insulation or reinforced insulation. (MEASUREMENT CATEGORY III) is applicable to test and measuring circuits connected to the distribution part of the building’s low-voltage WARNING: BE EXTREMELY CAREFUL IN THE USE OF THIS METER. Improper MAINS installation.

  • Page 4: Fcc Compliance Statement

    FCC Compliance Statement Pre-Operation PACKAGE CONTENTS Part Name Quantity Multimeter Black test lead Red test lead Warranty PRODUCT DESCRIPTION WARRANTY: 12 months Part Name Description For one year from the date of purchase, this product is warranted against any defects in material or workmanship.

  • Page 5: Product Specifications

    Pre-Operation (continued) Pre-Operation (continued) □ Input Impedance: 10MΩ The voltage current range is used for Function Selection Key □ Maximum Input Voltage: 600V DC switching AC/DC mode, the resistance range is used for switching mode. AC VOLTAGE SPECIFICATIONS Used to select functions and desired ranges. Select Switch Hz% Switching Key Measuring Range...

  • Page 6: Operation

    Pre-Operation (continued) Pre-Operation (continued) CAPACITANCE SPECIFICATIONS Additional Specifications: □ Max. Current: 400mA Measuring Range Resolution Accuracy □ Overload Protection: mA measuring range: FF400mA/600V fuse ±(5.0% of rdg + 0.6 digits) 0.001nF ±(5.0% of rdg + 30 digits) □ Frequency Range: 40Hz – 400Hz 40nF 0.01nF ±(5.0% of rdg + 15 digits)

  • Page 8: Measuring Diode

    Operation (continued) Operation (continued) Measuring diode Measuring continuity CAUTION: To avoid the meter or measured CAUTION: To avoid the meter or measured equipment from being damaged, cut off all equipment from being damaged, cut off all power supply of measured circuits and power supply of measured circuits and discharge all high voltage capacitors discharge all high voltage capacitors before...

  • Page 9: Measuring Capacitance

    Operation (continued) Operation (continued) Measuring capacitance Measuring AC and DC current CAUTION: To avoid the meter or measured WARNING: To avoid damage to the meter or equipment from being damaged, cut off all injury if the fuse blows, never attempt an power supply of measured circuits and in-circuit current measurement where the discharge all high voltage capacitors before...

This manual is also suitable for:

730 696

Table of Contents

Save PDF