BG Electrical Smart! Installation And User Manual page 2

Smart Socket Setup Instructions
5. Install the BG Home App
Download the BG Home App for your Android or iOS device.
7. Power Up Your Socket
Ensure that your Smart Socket is connected to the power supply as per the 'Wiring
Instructions'.
After the initial power up both switch LED indicators will illuminate
the socket will be ready for setup.
Press and hold button A for 5 seconds. The socket will then enter Wi-Fi configuration mode
and the indicator illuminated
Follow the on-screen instructions to set-up your device.Please make sure your phone is
connected to 2.4GHz WiFi (not 5GHz)so your device can be discovered and set-up
successfully.
Once set up your mobile device will indicate a successful connection and the red indicator on
the socket will turn off.
Connecting Additional Smart Devices
To connect additional BG Smart devices, please follow the steps below:
1. Connect and power up the device.
2. Press and hold the power button until the
3. Go to the BG Home app and 'Add Device'.
4. Once found and connected name the device accordingly.
Repeat for all additional BG Smart devices.
If you already have a BG Smart
device connected, the App can
auto-discover a new device for
faster set-up.
RED flashing quickly.
You can now plug in the device you would like to control.
If these setup procedures fail,follow the "AP Config" setup and
follow the step by step instructions in the App.
RED LED flashes quickly.
Setup Advice & How-To Guides
Installation and User Guide
6. Account Creation
If you already have a BG Home
account, sign in.
If you are new to BG Home, sign
up and follow the on screen
instructions.
RED and start to blink and
Power Control
Power control at each socket can be
manual or 'smart' The power button
will illuminate BLUE for ON.
POWER BUTTON
Indicator Brightness Control
The intensity of the power indicators can be adjusted. Press
and hold button B for 5 seconds. The indicator will illuminate
BLUE and it will enter the brightness adjustment mode. When
the brightness has reached the desired level release the
button.