Catherine Lansfield Aspire bed frame Instruction Manual

Hide thumbs

page of 42

/ 42
Bookmarks

Quick Links

Download this manual

INSTRUCTION MANUAL

Need help?

Do you have a question about the Aspire bed frame and is the answer not in the manual?

Questions and answers

Summary of Contents for Catherine Lansfield Aspire bed frame

Page 1 INSTRUCTION MANUAL...
Page 2 Before you get started... We’re confident you will be happy with your new Aspire bed frame. However it is worth making sure before you unpackage and start to put it together. Please check the following: A) CORRECT COLOUR Please make sure you are happy with the colour. There is no need to fully unpack, please just check the first component.
Page 3 CONTENTS SUPPLIED – 3ft Name Appearance Quantity Siderail Head/Foot Rail Slat (2 Rebates) Adjustable Slat (1 Rebate) Slat Mount Adjustment Sleeve Support Rod 24 x Counter Sunk Short Screws 2 x Counter Sunk Long 4 x Button Head Long...
Page 4 CONTENTS SUPPLIED – 4ft to 4ft6 Name Appearance Quantity Siderail Centre Beam Head/Foot Rail Slat Half Slat Slat Mount Adjustment Sleeve Support Rod 32 x Counter Sunk Short Screws 4 x Counter Sunk Long 4 x Button Head Long...
Page 5 CONTENTS SUPPLIED – 5ft & 6ft Name Appearance Quantity Siderail Centre Beam Head/Foot Rail Slat Half Slat Slat Mount Adjustment Sleeve Support Rod 32 x Counter Sunk - Short Screws 4 x Counter Sunk - Long 4 x Button Head Long...
Page 6 1. Lay out components and check all are present. For 3ft frame skip next steps and go to 4. 2. Line up Centre Beam bracket with pre-drilled holes in Head/Foot Beams...
Page 7 3. Screw in 4 Small Screws at both ends. 4. Line up the Side Beams with the Head/Foot Beams.
Page 8 5. Screw in 3 corners using the button head Torx screws and Torx Screwdriver...
Page 9 6. Insert plastic Slat Mounts into cut outs on Side Beams. 7a. For 4ft to 6ft frame: Build up adjustable slats. You will need 1 x Standard Slat, 2 x Half Slats and 4 x Adjustment Sleeves per adjustable slat.
Page 10 7b. For 3ft frame: Build up adjustable slats. You will need 1 x Standard Slat with 2 rebates, 1 x Adjustable Slat with 1 rebate and 2 x Adjustment Sleeves. 8. Position one Half Slat (4ft to 6ft) or one adjustable slat (3ft) beneath the Standard Slat as shown.
Page 11 9. Slide over the Adjustment Sleeves. For 3ft frame skip next step and go to 10. 10. Repeat with opposite side of the slat. Repeat with another 3 slats.
Page 12 11. Begin to position slats in frame. 4 Standard Slats to begin with. 12. Using the same method position the 4 adjustable slats.
Page 13 13. Position the remaining Standard Slats using the same method.
Page 14 14. Using the Torx button head screws, attach the final corner of the frame ensuring all slats slot into Slat Mounts . 15. Flip the frame over and screw in the remaining Small Screws into the corner mounts.
Page 15 16. Repeat with all 4 corners. For 3ft frame skip next step and go to 19. 17. Insert the Countersunk Long Screws into the centre rail.
Page 16 18. Screw Support Rod into position on Centre Rail. 19. Screw Support Rod into position on Side beams using the Countersunk Long Screws.
Page 17 20. Position Plastic Corner Covers. 19. Slat frame is complete.
Page 18 CONTENTS SUPPLIED - 3ft Name Appearance Quantity Headboard Footboard Sideboard Legs Slat Frame M10 Bolts Allen Key Bolts...
Page 19 CONTENTS SUPPLIED - 4ft to 6ft Name Appearance Quantity Headboard Footboard Sideboard Legs 4 x Corner 1 x Centre Slat Frame M10 Bolts Allen Key Bolts...
Page 20 1. Lay out components and check all are present. 2. Attach legs to Slat Frame using provided Bolts. Repeat for all 4/5 legs.
Page 23 4. Position end screw hole of Sideboard in-line with end Slat Frame hole. 5. Partially screw in using provided Allen Key.
Page 24 6. Repeat at opposite side of Side Board. 7. Tighten Allen Key Bolts using provided Allen Key...
Page 25 8. Screw in and tighten centre Allen Key Bolts.
Page 27 9. Repeat steps 4. – 8. for opposite Side Board. 10. Position end screw hole of Headboard in-line with end Slat Frame hole. Partially screw in with provided Allen Key.
Page 28 11. Repeat at opposite side of Headboard. 12. Tighten Allen Key Bolts using provided Allen Key.
Page 29 13. Screw in and tighten centre Allen Key Bolts.
Page 30 14. Repeat Steps 10. – 13. for footboard...
Page 33 14. Ensure Legs and Allen Key Bolts are all tight. The frame is then ready to position mattress.
Page 34 Headboard Components Name Appearance Quantity Headboard Struts Washer Allen Key Bolts...
Page 35 1. Lay out components and check all are present. 2. Predrilled holes on the reverse of the headboard can be identified by the below sticker Fit Headboard Bolts Here...
Page 36 3. Line up holes A and B on the Struts with holes A and B on the Headboard 4. Screw the struts into place using the Washers and Allen Key Bolts with the provided Allen Key...
Page 39 5. Line up the strut slots with the mounting holes on the bed frame.
Page 40 4. Screw into place using the Washers and Allen Key Bolts with the provided Allen Key...
Page 42 Care Instructions • Hair products such as hairsprays, oils and gels may affect the finish. Avoid prolonged contact with such products. • Regular cleaning is essential to avoid build up of these products on the surface. • Avoid exposure to direct or prolonged periods of sunlight and position away from direct heat sources such as radiators.