CraftBot Plus Quick Start Manual

QUICK START GUIDE
Thank you for purchasing a CraftUnique product and welcome to the world of 3D crafting!
You are just a few steps away from having your first 3D object printed by your brand new CraftBot.
I.
UNPACKING
1
1
Step #
You've already found the Quick Start Guide. Excellent! Now remove the large sheet resting under the foam.
Under the sheet you will find your CraftBot attachable accessories in a cardboard cradle resting in the cavity
of the CraftBot 3D printer.
2
Step #
Remove this cradle from the box with care and place it in a safe out-of-the-way place.
3
Step #
The printer is wrapped in a tight fitting plastic protective cover. Open up the covering.
Firmly grasp the frame of the CraftBot and lift it out of the box without touching the fragile inner parts.
CraftBot weights 14 kg (almost 31 lbs) – seek assistance if needed!
4
Step #
Place the printer on a stable and level surface with sufficient space around.
1
4
7
2
2
5
8
WWW.CRAFTBOT.COM • WWW.CRAFTBOTUSA.COM
PLUG&PLAY 3D PRINTER
WITH 5 YEARS WARRANTY
3
II
3
ACCESSORY CHECK
.
It's time to unpack additional parts.
Below you can see the contents of the
box. First of all, check the list to make
sure nothing is missing!
1. Filament guide tube holder
6
2. Filament guide tube
3. Filament spool holder
4. Filament spool
5. Hex wrenches (5x)
6. USB Flash storage
7. USB A-B cable and AC power cable
8. Filament monitoring system (FMS)*
4