Download
Share
Print this page
dB Technologies VIO L210 Quick Start User Manual
  1. Manuals
  2. Brands
  3. dB Technologies Manuals
  4. Speaker System
  5. VIO L210
  6. Quick start user manual
dB Technologies VIO L210 Quick Start User Manual

dB Technologies VIO L210 Quick Start User Manual

Hide thumbs Also See for VIO L210:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
The warnings in this manual must be observed together with the "USER MANUAL - Section 2".
Le avvertenze nel presente manuale devono essere osservate congiuntamente al "MANUALE D'USO - Sezione2".
Die Warnungen in diesem Handbuch müssen in Verbindung mit der "BEDIENUNGSANLEITUNG - Abschnitt 2" beobachtet
werden".
Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECHNIQUES -
Section 2"
Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del "MANUAL DEL USUARIO" -
Sección 2".
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com
VIO L210
www.dbtechnologies.com
Quick start user manual
Section 1
info@dbtechnologies-aeb.com
Rev 1.0 cod. 420120248Q

Advertisement

loading
Need help?

Need help?

Do you have a question about the VIO L210 and is the answer not in the manual?

Questions and answers

Related Manuals for dB Technologies VIO L210

Summary of Contents for dB Technologies VIO L210

  • Page 1 Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO” - Sección 2”. A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA) Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com VIO L210 Rev 1.0 cod. 420120248Q...
  • Page 2 Thank you for choosing a dBTechnologies Product! VIO L210 is the new dBTechnologies flagship 2-way professional active line array module. It is equipped with: one 1.4” neodymium compression driver exit (3” titanium voice coil) and two 10” neodymium woofers (2.5” voice coil).
  • Page 3 - Fasten the two enclosures using the quick-release pins of the upper VIO L210. - Insert the swing rear bracket of the - Check that all the pins are properly inserted and upper enclosure into the related locked before other mounting steps.
  • Page 4 2 movable bars [K] for stack mounting. The maximum admitted number of cabinets in different configurations depends on various parameters, like VIO L210 splay angles and DRK-210 tilt. The free dBTechnologies Composer software helps the user in the right choice For further and detailed information please refer to for the best mechanical and acoustical result.
  • Page 5 (1) of the first module of the array. Then connect the useful link audio output (1) to other VIO L210 modules, for the connection of all the line-array elements. Set the Audio Attenuation (6) of the loudspeakers to 0 dB.
  • Page 6 Network dBTechnologies Composer. Connect the power link output (10) of the first module to the mains input (9) of a second VIO L210 module of the line-array, and so on, in order to link the a) dBTechnologies Network power supply between all the elements.
  • Page 7 SPL levels in outdoor environment, system coverage, system delays. The user-friendly graphic interface helps the user to easily understand in-depth settings. Those VIO L210 parameters can be controlled by using dBTechnologies Network: MUTE/SOLO switch* INPUT ATTENUATION SPEAKERS COUPLING...

  • Page 8: Acoustical Data

    If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions. Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.