Table of Contents
Advertisement
Quick Links
Designed to offer postural support and a certain degree of restraint to children and adult
Model 27 will fit:
Single vehicle seats, including low or high backed
Split Backed double seats, including low or high backed
Aircraft seats by many leading Airlines
Other types of single seating.
The harness consists of a full body harness connected to a
back pad which is fitted horizontally around the vehicles seat
back with two horizontal fixing straps.
Model 27 is used on aircraft seats by many leading
airlines. The two horizontal straps do not interfere with
the passenger behind using the drop down trays.
We always advise our clients to seek permission from the
airlines to use our harnesses prior to departure.
The waist belt on this harness is fitted with a Press Release
buckle for those passengers who won't undo the buckle
or need to be released quickly from the harness
M.27A - 5 yrs to 8 yrs
Tel: 01253 852298 Fax: 01253 821780
Model 27 Press
to keep them in an upright sitting position.
M.27 Fixing Straps
Crelling Harnesses For Disabled Ltd.
12 Crescent East, Thornton-Cleveleys, Lancashire, FY5 3LJ
Email:
Available in three Sizes:
Up to 5 yrs
5 yrs to 8 yrs
9 yrs to Adult
This harness is not classed as a safety harness.
The vehicle safety belt MUST be worn over the top of our
harness unless they are exempt for medical reasons.
Optional Extra
A Houdini Stop can be fitted to this harness.
This chest strap ensures the passenger stays safely
and correctly positioned within their harness.
It simply clips on to each shoulder strap of the
harness to help prevent the passenger from
separating the shoulder straps in order to escape.
M.27A fitted to an aircraft seat
info@crelling.com
Website:
27I
27A
27B
IMPORTANT:
www.crelling.com
Advertisement
Table of Contents
Related Manuals for Crelling Harness 27
Summary of Contents for Crelling Harness 27
- Page 1 This harness is not classed as a safety harness. The vehicle safety belt MUST be worn over the top of our Model 27 is used on aircraft seats by many leading harness unless they are exempt for medical reasons. airlines. The two horizontal straps do not interfere with the passenger behind using the drop down trays.
- Page 2 Adjuster Buckles on the Shoulder & Under Straps. Fasten the vehicle safety belt over the top of the Model 27 Harness. To remove the passenger from the harness - Unfasten the buckle on the waist belt at the centre-front.
- Page 3 50mm Aluminium Bar Buckle Webbing is threaded through the sliding bar buckle Sliplock Slide Loose ends of webbing are often passed back through these slides to prevent slippage & to prevent the Fixing Straps from loosening during transit. 40mm Adjuster Buckle To Extend Straps To Tighten Straps The 40mm Adjuster is slightly spring loaded...
- Page 4 Model 27 Being fitted to a Monarch Aircraft Seat Accepted for passengers with special needs by many airlines Including:...
- Page 5 The model 27 harness is fitted directly onto the vehicle seat first, prior to fitting the high backed booster seat. The high backed booster seat is then fitted onto the vehicle seat.
Need help?
Do you have a question about the 27 and is the answer not in the manual?
Questions and answers