Table of Contents
Related Manuals for Mocka Asta Armchair
Summary of Contents for Mocka Asta Armchair
- Page 1 Asta Armchair Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. dowel small screw long screw Allen key Hardware Supplied Screwdriver required mocka.co.nz | mocka.com.au...
- Page 2 Asta Armchair Assembly Instructions short length middle section long length Begin by assembling the metal frame for the seat. Find the middle and Find the short length end piece and slot it into the top of the middle longer end sections of the metal frame. Slot the end pieces into pipes section as shown to complete the metal seat frame.
- Page 3 Asta Armchair Assembly Instructions seat lining velcro strip Flip frame up as shown and carefully begin sliding on the under seat Pull the lining over the whole frame and fasten closed over the top using lining. Pull the lining sleeve over the entire frame.
- Page 4 Asta Armchair Assembly Instructions seat cushion seat frame & lining Find the padded seat cushion. Unzip the middle opening on the back. Zip seat cushion closed over the frame and attach velcro strips together. Slide the seat cushion over the frame and lining from the top down.
- Page 5 Asta Armchair Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS To make up the wooden legs for the Asta chair insert two dowels (A) Slide seat between the chair legs and armrests. Ensure holes in the seat into each end of both support braces. Slot into both chair legs as cushion line up with corresponding holes in the wooden chair legs.
- Page 6 Asta Armchair Assembly Instructions Attach seat cushion and frame to the chair legs using short screws (B). Finally ensure all screws are securely tightened before use. Make sure each screw passes through the holes in the cushion and All done! Enjoy! lining and into the metal frame.
Need help?
Do you have a question about the Asta Armchair and is the answer not in the manual?
Questions and answers