Advertisement
Advertisement
Table of Contents
Related Manuals for Izzo Golf SWAMI
Summary of Contents for Izzo Golf SWAMI
- Page 1 GOLF GPS WATCH...
-
Page 2: Specifications
INTRODUCTION With a comfortable & modern design, the SWAMI Watch not only looks the part but backs it up with excellent performance on the course. By providing precise distances to the front, center, and back of the green as well as distances to water hazards, bunkers, &... - Page 3 CHARGING Attach the magnetic pins on the charging cord to the magnetic charging ports located on the side of the Swami Watch. Make sure the charging cradle snaps into place and is securely attached to the unit. Be sure the pins are aligned, then insert the other end of the charging cord into a USB port or AC adapter (included).
-
Page 4: Description Of Terms
DESCRIPTION OF TERMS • PRESS - PRESS & RELEASE button quickly. • HOLD - PRESS & HOLD button until desired screen appears or change happens. [ POWER ] - Power On/Off Backlight On/Off Magnetic Charging Ports [ UP ] - Scroll Up [ OK ] - Select Options, HOLD to access Main Menu, Toggle Shot Distance and Scorecard while in Golf Mode... -
Page 5: Display Diagram
DISPLAY DIAGRAM PLAY MODE HAZARD MODE Distance to the Center of Green Distance to the Back of Green Distance to the Front of Green Distance to front and back of Dogleg Distance to layup or carry Water Distance to layup or carry Bunker HOW TO USE... -
Page 6: Time Mode
TIME MODE PRESS [ OK ] button to toggle between Analog or Digital Time Display. PRESS [ POWER ] button to turn Backlight On/Off. To set time and date, see Settings. (Pg. 11) HOLD [ OK ] button to access Main Menu. AT GOLF COURSE From Time Screen, HOLD [ OK ] button to access Main Menu. -
Page 7: Play Mode
PLAY MODE PRESS [ OK ] button to toggle between Hazard, Scorecard, and Shot Distance screens. To exit Play Mode at any time, HOLD [ OK ] button. HAZARD VIEW Note: If no hazards are present, screen will be blank. PRESS [ OK ] button to access the Hazard screen. -
Page 8: Shot Distance
SHOT DISTANCE Note: Shot Distance must be turned On in Settings. PRESS [ OK ] button to access Shot Distance. To start measuring Shot Distance, PRESS the [ DOWN ] button. As you travel to your ball, the distance will begin calculating. - Page 9 SCORECARD Note: Scorecard must be turned On in Settings. PRESS [ OK ] button to access Scorecard. Use [ UP/DOWN ] buttons until number of total strokes for that hole is displayed. HOLD the [ DOWN ] button to scroll to Putts, use [ UP/DOWN ] buttons until correct number of putts is displayed.
-
Page 10: End Round
END ROUND When finished with round, HOLD [ OK ] button to return to Main Menu. If Scorecard is turned on, use the [ UP/DOWN ] buttons to scroll to desired option, PRESS [ OK ] to select. Save & Exit - Save Scorecard, end round, •... - Page 11 ODOMETER (continued) To start, PRESS [ UP ] button. The Odometer will begin calculating the distance you will travel. To reset, PRESS [ DOWN ] button. The distance will return to zero (0). To exit and return to Main Menu, HOLD [ OK ] button.
- Page 12 TIME SET Note: To set the correct time, select Play Golf to connect to the satellites. The watch will then automatically set the correct time (must be outside). Use [ UP/DOWN ] buttons to manually adjust the time by hour. PRESS [ OK ] button to save and return to Settings Menu.
-
Page 13: Date/Time Format
DATE/TIME FORMAT Use [ UP/DOWN ] button to change the Date Format (MM-DD-YYYY, DD-MM-YYYY, YYYY-MM-DD). PRESS [ OK ] button to scroll down. Use [ UP/DOWN ] button to select 12 hour or 24 hour clock. HOLD [ OK ] button to save and return to Settings Menu. - Page 14 SCORE HISTORY Use [ UP/DOWN ] buttons to scroll to the saved score you would like to view, then PRESS [ OK ] . PRESS [ OK ] button to save and return to Settings Menu. UNIT Use [ UP/DOWN ] buttons to change unit of measure to Yards or Meters.
-
Page 15: Display Type
DISPLAY TYPE Use [ UP/DOWN ] buttons to toggle the display type (Type 1 or Type 2). PRESS [ OK ] button to save and return to Settings Menu. DAYLIGHT SAVINGS TIME (DST) Use [ UP/DOWN ] buttons to toggle DST (On/Off) PRESS [ OK ] button to save and return to Settings Menu. -
Page 16: Warranty Policy
(1) year from the original purchase date. IZZO Golf cannot refund your purchase unless purchased directly from IZZO Golf. IZZO Golf will replace or repair any unit that is determined defective under normal use within the warranty period. Please call Customer Service at 800-777-7899 to request a Return Authorization. - Page 17 CAUTION Global Position System (GPS) was developed & is managed by the United States Department of Defense (DOD) which is responsible for its normal operation and position precision control; the U.S. is entitled to affect function or position precision of the whole system without prior notification or announcement based on its political considerations or safety of national defense.
Need help?
Do you have a question about the SWAMI and is the answer not in the manual?
Questions and answers
I purchased a swami watch on Ebay and cannot set the time or date.
To set the time and date on an Izzo Golf SWAMI watch:
1. Press and hold the [OK/Menu] key to access the Main Menu.
2. Navigate to the Time Mode page.
3. Use the [Up] key to cycle through different time and date settings.
4. Adjust the settings as needed for time, date, time format, and daylight saving time.
5. Press [OK/Menu] to confirm selections.
For further adjustments, refer to the Swami Settings section in the manual.
This answer is automatically generated
When the satellite searches it says 999
The Izzo Golf SWAMI shows 999 when it is not in range of the hole the device is displaying. If this happens at home, it is likely because the device is not detecting a valid course. If it happens at the golf course, ensure that the correct course is selected and that the hole number on the display is accurate.
This answer is automatically generated
my Swami watch just started to say course list , and nothing more, instead of finding the course
Your Izzo Golf Swami watch may not be finding the course due to one of the following reasons:
1. Database Issue – The course may not be included in the Swami database. You can check available courses using the course search feature on the Izzo Golf Product Support page.
2. GPS Signal Issue – If the watch is not recognizing any courses, it may not be receiving a proper GPS signal. Try restarting the device and ensuring you are in an open outdoor area.
3. Firmware or Software Issue – If the device previously worked but is now failing to find courses, consider checking for firmware updates or resetting the device.
4. Battery or Hardware Problem – A failing battery or internal hardware issue may cause the device to malfunction. If the problem persists, contacting Izzo Support is recommended.
This answer is automatically generated
What does demo mean on screen
What does the inscription Demo mean on swami screen
How do you change the meters to yards and how to change the language to english?
To change meters to yards:
1. From the Time Mode page, press and hold the [OK/Menu] button to access the Main Menu.
2. Use the [Up] or [Down] button to select "Settings" and press [OK/Menu].
3. Use the [Up] or [Down] button to select "Unit" and press [OK/Menu].
4. Use the [Up] or [Down] button to select "Imperial" (for yards) and press [OK/Menu].
5. Press and hold [OK/Menu] to return to the Settings Menu.
To change the language to English:
1. From the Time Mode page, press and hold the [OK/Menu] button to access the Main Menu.
2. Use the [Up] or [Down] button to select "Settings" and press [OK/Menu].
3. Use the [Up] or [Down] button to select "Language" and press [OK/Menu].
4. Use the [Up] or [Down] button to scroll to "English" and press [OK/Menu].
5. Press and hold [OK/Menu] to return to the Settings Menu.
This answer is automatically generated
@Kenneth McDaniel
My unit is in a foreign language and can't figure out what the options are. Are there a way to change so I can read the options?
To change the language settings on your Izzo Golf SWAMI unit:
1. From the Time Mode page, press and hold the [OK/Menu] key to access the Main Menu.
2. Use the [Up] or [Down] key to select "Settings" and press the [OK/Menu] key.
3. Use the [Up] or [Down] key to select "Language" and press the [OK/Menu] key.
4. Press and hold the [OK/Menu] key to return to the Settings Menu.
This answer is automatically generated