myHummy The Humming Heart User Manual page 3

(by compressing the spring). Check the
batteries for dmage before use. Damage to
the insulating film of the battery may cause
a short circuit and severe heating of the
battery and/or the spring.
3. carefully screw
to ensure
of children's reach.
REPLACING THE BATTERIES
To remove the batteries, gently move them
towards the spring (compressing the spring)
and lift the battery. Never remove the batteries
from the side with the spring as this may
cause damage to the spring or the battery.
Under no circumstances should you attempt
to pry the battery out with other objects as
the battery may become damaged and unsafe.
Damage to the insulating film of the battery
may cause a short circuit and severe heating of
the battery and/or the spring. Always check the
batteries for mechanical damage before use.
SWITCHING ON MYHUMMY
Press the multi-function
approximately 1
Your MyHummy will start to emit sound. In manual
control mode, turning the Humming Heart on
will also activate the Sleep Sensor (MC and MB
models). Other functions of the multi-function
button are described further along in this leaflet.
SLEEP SENSOR (MC AND MB MODELS)
The sound will automatically start to fade out
after the device has been functioning for about
60 minutes (when activated manually). The
sound will automatically fade out at a specified
time (when set and activated with the mobile
app - MB01 and MB02 models). After fading
out, the Humming Heart will enter stand-by
6 English
the flap back
the batteries are
button
second and
mode with the Sleep Sensor mode on. If your
baby starts to cry, the same sound will gently
fade in until it reaches the previous volume level.
The sound will play for another 60 minutes.
This process
on next 12
out To turn the Sleep Sensor off, turn the sound device
off by pressing the multi-function button or use
the mobile app.
NON-STOP SYSTEM (MC AND MB MODELS)
To activate
on the
1 second and release) and then click 3 times in
a row - you will hear a beep which confirms the
mode selection. The sound will play continuously
for 12 hours. During this time, the sound device
will not turn off (Sleep Sensor Mode is deactivated),
nor will it change the volume or sound.
After 12 hours, the volume will gradually fade out
before switching off completely. You can turn the
sound off at any time by holding the button for
1 second and releasing it. To deactivate the non-
stop mode, please turn off the sound device by
pressing the button for 1 second and releasing it.
After switching off, the sound device defaults
back to the Sleep Sensor mode. The Non-Stop
Mode and Sleep Sensor Mode can never be active
at the same time.
for MOBILE APP (MB01 AND MB02 MODELS)
release. This feature is available on selected models
only: MB01, MB02 (green Humming Heart with
a white logo). You can use your phone as a "remote
control" for myHummy. You will need to pair your
phone with the Humming Heart via Bluetooth®.
The connection will remain active for 72 hours
since the last interaction. When the sound device
has not been used for a long period of time, it
enters stand-by mode. To reconnect, please use
the multi-function button. To reconnect, press the
multi-function button.
DOWNLOADING THE APP (MB01 AND MB02
MODELS)
In order to download the myHummy mobile
app, use your smartphone to visit this website:
http:/ /app.myhummy.com
links to download the app, further instructions,
answers to frequently asked questions and
a contact form to get in touch with our technical
support team if you need any assistance.
will continue
hours or until
the non-stop
device (hold the
There, you will find
for the
switched off.
mode, turn
button for