Preparation; Operation; Heating And Blower Levels - Silvercrest SHTT 2200 B1 Operating Instructions Manual

Preparation

1) Remove all parts of the appliance and the operating instructions from the carton .
2) Remove all packaging material .

Operation

This appliance is fitted with a contact sensor . This means that the hairdryer only
switches on if you are holding it in your hand and touching the sensor field
3 at the same time .

Heating and blower levels

1) Insert the plug into the mains power socket .
The hairdryer is fitted with two function switches . You can use these to separately
select the strength of the air flow (blower level switch 6) and the heat level (heat
level switch 7):
Blower levels
0
Heat levels
2) Select the desired blower level using the blower level switch 6 . The control
lamp 5 illuminates and shows that the hairdryer will start as soon as the
sensor field
3) Select the desired heating level using the heating level switch 7 .
4) If you are not holding the hairdryer in the hand:
take hold of the hairdryer with your hand on its handle . This means that you
will be touching the sensor field
If you put the hairdryer down for a short time, it will switch off automatically .
■ 42 │ GB │ MT
hairdryer is switched off
reduced airflow
increased airflow
reduced heat level
medium heat level
high heat level
3 is contacted .
3 and the hairdryer will switch on .
SHTT 2200 B1