Removing The Upper Rack(S) - Sears Elite 665.12762K310 Manual

COMPONENT ACCESS
Removing The Upper Rack
(SatinGlide Max rails)
To remove the rack:
1. To gain access to the removable tabs on the tracks/rails,
pull the upper rack forward about halfway out of the tub.
2. On one side, press the tab on the track in and pull up the
front end of the rack out of the track. See figures 1 & 2.
3. Then repeat this step on the other side to completely
remove the front end of the rack.
4. Then remove the back end of the rack, by pulling the back
end out with a slightly forward, and then upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub. Along the
sides of the racks are round attachment tabs. Align the rack's
back end attachment tabs with the cutout in the track. Push
down into place. Pull the tracks completely out, and align the
rack's front end attachment tabs with the cutout in the track.
Push down into place. You will hear a snap when the front end
of the rack is secured into place on each side.
3-12 Kenmore Elite 2013 Stainless Steel Tall Tub Dishwasher
n

Removing the Upper Rack(s)

Figure 1
Figure 2
position and level.
Removable Top Rack (for SatinGlide
Removing The Upper Rack
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
(standard rails)
IMPORTANT: Remove dishes prior to removing the top rack from
dishwasher.
1. To gain access to the track stops, pull the upper rack
To remove the rack
forward about halfway out of the tub.
To gain access to the track stops, pull the upper rack forward
2. To open, flip the track stop toward the outside of the tub.
about halfway out of the tub.
After opening both track stops, pull top rack out of the
To open, flip the track stop toward the outside of the tub.
rails. See figure 3.
After opening both track stops, pull top rack out of the rails.
12
rails)
®
Figure 3
and top r
in the low
Top Rack
To remo
1. To ac
rack
clicks
2. To op
track
3. After
of the
slide
4. Close
5. Slide
To replac
1. Gent
and c
2. To op
track
3. Place
track
4. Inser
slots.
5. Close
into d