Formatting a CD Swapping out data on CD Alarm simulation Connection with a remote station Searching for and looking at archive images from the remote station Notes – 2 – DiBos 4.998.137.631 A1 A1 02.03...
Introduction and safety instructions What do these operating instructions tell you? These operating instructions provide you with all relevant information that you need in order to perform the tasks described in the table of contents quickly and easily. You will find more detailed information about the respective screens online on your system if you press the F1 key or click the Help button.
Introduction to the system When the computer is booted, the system runs automatically in the background and is able to respond to signals and record images. You must only log on if you wish to perform operating tasks. Only authorized users have access to operate the system, based on a password. Depending on your access privileges, with the user interface you can: ·view live images for monitoring purposes and manually switch camera views ·open the image archive and retrieve, print, and delete saved images...
The basic live image window General information Display of several live images You can display several live images, depending on the number of connected and configured cameras. The live images are always arranged automatically from left to right in consecutive rows. For each camera marked with a BOSCH Security Systems GmbH The basic live image window...
The basic live image window General information Camera deactivated Camera activated: if you click this box, you can activate the camera and show the live image. If several cameras are selected and activated with the left mouse button (highlighted in blue), these camera images can all be shown together.
The menu bar of the basic window in the live image System Image archive: change to the image archive Configuration: change to the configuration Alarm simulation: trigger an alarm or other actions Change user: log the user off and log on screen for new user Change password: change the password...
Basic window toolbar / alarm simulation bar in live image Icon Name Explanation Image Look at, search for, swap out or print archive saved images in local/remote archives. Configuration Hardware, image transmission, and user settings. Not active with integrated operating station.
Basic window toolbar / connection window in live image The Status bar (lowermost line of the screen) contains help information about the menu you are currently using. It shows the name of the remote station to which an external connection has just been established.
Control of a dome camera Configured dome camera If a dome camera is configured, an arrow will appear in its live image if the user moves the mouse (variable speed) over the live image. With the left mouse button, you can control the camera in the direction of the activated arrow.
Page 11
The image archive of the basic window Information about image archive You can also use the Image archive menu to open and close live image display. It enables access to and searching in: – local and remote video system image archives and –...
The image archive of the basic window Several archive images tiled You can display several archive images next to one another (tiled), up to a maximum of 8. The archive images are always arranged from left to right consecutively and in a row. In each image, you can use the functions of the recorder buttons. Selecting menu tree for archive images Example of image archives BOSCH Security Systems GmbH...
Image archive menu bar System Live image: change to the live image Configuration: change to the configuration Alarm simulation: trigger an alarm (depending on the configuration) Close image archive: close image archive basic window, return to the live image Exit system log off the system Connect Establish connection: establish connection via...
Image archive toolbar Icon Name Explanation Live Switchover to live image display. image Configuration Hardware, image transmission, and user settings. Not active with integrated operating station. Alarm Alarm simulation can be called up simulation depending on the configuration. Connect Establish a connection with a remote station via ISDN/network/modem.
Image archive toolbar / alarm simulation bar Icon Name Explanation Alarm Buttons simulation simulation signals or other configured actions. The alarm simulation bar can be embedded in the toolbar or free–standing. Embedded Alarm simulation 1 triggered Alarm simulation 2 not triggered Alarm simulation 3 and 4 not configured Free–standing BOSCH Security Systems GmbH...
Image archive status bar / connection window / recorder buttons The Status bar (lowermost line of the screen) contains help information about the menu you are currently using. It shows the name of the remote station to which an external connection has just been established.
Attention: Some backup drives may only be removed or connected when DiBos is switched off! For details, read the manual for your backup drive. – 17 – A1 02.03...
Deleting archives / searching for archive images and additional data You are now on the live image Deleting 1. From the System menu, select the old search Image archive command. The image archive will be results opened. 2. On the archive tree, click on the + sign in front of the archive.
Save as dialog box, enter the file name with the ending .jpg. Connecting a backup drive Connect 1. Exit DiBos from the System menu with the backup Exit DiBos command . You must have drive administrator authorization to do this.
Formatting a CD Call up the taskbar. It is located below your status bar. If it is not shown, call it up with the keyboard using the Windows key. You will find the CD icon on the right side of the taskbar. Click on the dialog box for the desired action and confirm. Formatting (CD RW) can take up to 20 minutes. Bosch recommends using CD-R discs as they do not require as long of a formatting time.
Page 21
Formatting a CD If you want to eject the CD, click the Eject button. Click next to one of the options and confirm with BOSCH Security Systems GmbH – 21 – A1 02.03...
Swapping out data on CD Change from the live image to the image archive. Proceed as follows: – Place a formatted CD in the drive From the Database menu, – select – Show backup drive and confirm From the Database menu, –...
Alarm simulation If alarm simulation signals are configured, you will be able to see this from the buttons shown (see alarm simulation bar) and from whether the Alarm simulation element is active on the System menu. If you select alarm simulation, a dialog box in which you can trigger alarms for a maximum of four detectors will appear.
Connection with a remote station Incoming alarm connection You are on the live image view of an image receiver Automatic On alarm, an external station automatically connection establishes image transmission to your system established and the images transmitted can be saved by a remote automatically by the receiver in the archive station on...
Page 25
Connection with a remote station Looking at live images, performing control procedures on a remote station You are now on the live image Establish From the Connection menu, select the connection Connection command. The Connection dialog box opens. Select the desired connection type, e.g. ISDN/network.
Searching for and looking at archive images from the remote station You are now on the live image Open image From the System menu, select the Image archive archive command. The image archive will be opened. Establish From the Connection menu, select the connection establish connection command.