Advertisement
Quick Links
OWNER'S MANUAL
A E R A T O R S P R E A D E R
MODEL:
A S - 4 0 B H
• Assembly
• Installation
• Operation
• Repair Parts
For use with
Lawn/Garden Tractors
Visit us on the web!
www.brinly.com
English Manual
Call Customer Service, Toll-Free: 877-728-8224
Important: This manual contains information for the safety
of persons and property. Read it carefully before
assembly and operation of the equipment!
English, Spanish &
French Manual
L-1711BH-F
Advertisement
Related Manuals for Brinly AS-40BH
Summary of Contents for Brinly AS-40BH
- Page 1 For use with Lawn/Garden Tractors Call Customer Service, Toll-Free: 877-728-8224 Important: This manual contains information for the safety Visit us on the web! of persons and property. Read it carefully before www.brinly.com assembly and operation of the equipment! English Manual L-1711BH-F...
-
Page 2: Table Of Contents
INTRODUCTION AND SAFETY ================================================================================================== CONGRATULATIONS on your new Brinly-Hardy Lawn Aerator! This accessory has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please do not hesitate to contact our knowledgeable customer service department toll-free at 1-877-728-8224. - Page 3 • When backing-carefully back straight to avoid jack-knifing which could result in damage to equipment. Installation Questions? Missing Parts? Replacement Parts? DON’T GO BACK TO STOP THE STORE! Please call our Customer Service Department, Toll Free: 877-728-8224 or customerservice@brinly.com English Manual L-1711BH-F...
-
Page 4: Parts
PARTS ================================================================================================== English Manual L-1711BH-F... - Page 5 "E" Ring, 1" B-4030 1/4" Wing Nut F-621 "E" Ring, 1/2" 1018833 Aerator Tine F-577 "E" Ring, 5/8" 1008563 Brinly Logo Decal B-6414-10 Lower Lever B-5718-10 Hopper Assembly B-5804 Pop Rivet, 3/16" x .815 K-654 Agitator Kit (Hwd. Incl.) B-5461-10...
- Page 6 HARDWARE IDENTIFIER ================================================================================================== DO NOT RETURN PRODUCT IF YOU ARE MISSING PARTS. Illustrations on this page Please Call: 1 (877) 728-8224 are to scale for faster identification of hardware during assembly. Hairpin Cotter (x1) D-146P ....Nut: Hex Head Locking Washer: Lock 5/16”...
-
Page 7: Assembly
For faster identification of hardware during assembly, simply lay the hardware on top of the illustration. Additional info and videos are available on our website: brinly.com This QR code links directly to the Aerator Spreader product page. Assembly Step 1-A Hardware Panel 1 1. - Page 8 ASSEMBLY ================================================================================================== Assembly Step 1-B Hardware Panel 1 ( and the hardware bag ) 1. Add a wheel (28) from Step 1-A to the support assembly (21). NOTE: Run each bolt from the outside, through the holes at the base of the assembly as illustrated. 2.
- Page 9 ASSEMBLY ================================================================================================== Assembly Step 3-A Hardware Panel 3 1. Align the tow bars. 2. From above, insert both 5/16 x 3” Hex Bolts (37) from Hardware Panel 3, as illustrated. 3. Beneath the tow bars, tightly secure each bolt in place with one 5/16”...
- Page 10 ASSEMBLY ================================================================================================== Assembly Step 4 Hardware Panel 4 1. Add a 5/16” flat washer (46) to each of the hex bolts (31) from hardware panel 4. 2. Align the transport lock bracket (3) with the hopper assembly (7) as illustrated. 3.
- Page 11 ASSEMBLY ================================================================================================== Assembly Step 5-B Hardware Panel 5 1. On one side, from an outside edge, run a 5/16 x 3” Hex Bolt (37) through the support assembly (21) and the tow bar (20). 2. Secure the bolt with a Hex Lock Nut (2).
- Page 12 ASSEMBLY ================================================================================================== Assembly Step 7 Hardware Panel 7 1. Slide the small grip (24) over the end of the Upper Lever (18). 2. At the other end of the Upper Lever (18), you’ll find an oval and circular opening. Connect the two levers by hooking the oval of the upper level over the end of the Lower Lever (55).
-
Page 13: Operation
OPERATION ================================================================================================== • CAUTION! Avoid stopping unit with flow control in “OPEN” position- material will continue to flow through hopper opening. If fertilizer is deposited too heavily in a small area, soak down thoroughly with a garden hose to prevent burning of lawn. - Page 14 OPERATION ================================================================================================== FLOW CONTROL ADJUSTMENT FLOW CONTROL SETTING OPEN & CLOSE: The material flow is shut off by moving Control Determine approximate flow control setting by using the chart below showing type of material to spread. Lever to the left and locking into “V” notch on calibration plate. Measure off a distance of 40 feet in your yard.
-
Page 15: Maintenance
If you have installation questions, are missing parts or need replacement parts, don’t go back to the store! Please find your product serial number and model number, then contact our Customer Service department: In North America and Canada call Toll-Free: 877-728-8224 Chat online: www.brinly.com Email: customerservice@brinly.com English Manual L-1711BH-F... -
Page 16: Warranty
Hardy Co. During the period of the warranty, the exclusive remedy is repair or replacement of the product as set forth above. Brinly-Hardy Company • 3230 Industrial Parkway • Jeffersonville, IN 47130 • (877) 728-8224 • brinly.com English Manual L-1711BH-F...
Need help?
Do you have a question about the AS-40BH and is the answer not in the manual?
Questions and answers