Cres Cor 1000HHSS2DE Operating And Maintenance Instructions Manual

5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: 1000HHSS2DE, 1000HHSS2DX, 1200HHSS2DE,
ELECTRICAL SPECIFICATIONS:
Model No.
1000HHSS2DE
1000HHSS2DX
1200HHSS2DE
1200HHSS2DX
1000HHSS2DE240
1000HHSS2DX240
1200HHSS2DE240
1200HHSS2DX240
NOTE: The above model numbers are basic models. They may include letters: P, M, E,
L or ending with S, Z, U, and/or HT.
IDENTIFYING YOUR CABINET:
Look for this label on the back of your cabinet. This information is needed when calling for questions or service.
UPPER RIGHT CABINET CORNER
HOW TO INSTALL CABINETS:
1. Remove all packing material from the inside and all
vinyl from the outside of the oven.
2. Place the oven in a well-ventilated area on level
floor.
3. Install the pan slide racks, or posts and angles, on
the sidewalls.
DOOR VENT ADJUSTMENT:
Open the door(s) and move the vent tabs on the
inner door(s) as needed to release humidity.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
& 1200HHSS2DX Hot Cabinets
Volts Watts
120 1800
240 1800
Amps Hertz
15 60
7.5 60
R
5925 HEISLEY RD. MENTOR, OHIO 44060
MOD. MOD. 1000CH
R
SER. SER. FAA-K5645C-001 FAA-K5645C-001
C US
29
AMPS AMPS
R
VOLTS VOLTS
208/240
3000
WATTS WATTS
COMMERCIAL COOKING APPLIANCE
MADE IN USA
CSA certified to UL 197 Rev. 9
HOW TO REVERSE THE DOOR OPENINGS,
IF NEEDED:
1. Unscrew and remove the latch from the door and
magnetic strike from the cabinet.
2. Unscrew the hinges from the cabinet body and
remove the door.
3. Remove the screws plugging the mating hinge,
latch and strike holes on the opposite sides of the
cabinet body and door.
4. Re-mount the hinges to the opposite side of the
cabinet and door.
5. Re-mount the latch and strike to the opposite side.
Insulated
FL-2390
Hot Cabinet
Rev. 0 (2/16) Page 1 of 6
Phase NEMA
1 5-20P
1 6-15P
Hz. Hz.
60 60
PH. PH.
1 1